Specifications

59
It sounds like the EPSON Stylus CX3200 is printing, but nothing prints.
■
The print head nozzles may need cleaning; see Cleaning the Print Head for
instructions.
■
The Stylus CX3200 won’t operate properly if it’s tilted. Place it on a flat, stable
surface.
Your EPSON Stylus CX3200 makes noise when you turn it on.
Your EPSON Stylus CX3200 is performing routine maintenance.
Printing or copying is too slow.
Make sure your system meets the requirements listed in the Requirements and Notices
booklet. If you’re printing a high-resolution image, you need more than the
minimum requirements. You may also need to:
■
Clear space on your hard disk or run a defragmentation utility.
■
Close open programs that you’re not using.
■
Increase your system’s memory (RAM).
For the fastest printing:
■
Select
Draft
as the Quality Type (Windows) or set the Quality/Speed slider to
Speed
(Macintosh) in your printer software.
■
If your document doesn’t include color, choose
Black Ink Only
(Windows) or
Black
ink (Macintosh) in your printer software (see Basic Windows Printing,
Printing With Macintosh OS 8.6 to 9.x, or Printing With Macintosh OS X), or
press the
B&W Copy
button (see Changing Copy Settings).
■
Turn
MicroWeave
®
off (Macintosh) and
High Speed
on in your printer
software.
■
If your EPSON Stylus CX3200 is connected to a USB hub, disconnect any
unused USB devices.
The margins are incorrect.
■
Make sure your paper settings are correct for your paper size. See see Basic
Windows Printing, Printing With Macintosh OS 8.6 to 9.x, or Printing With
Macintosh OS X.