Specifications

60
■
Choose the correct margins for your paper size. The margins must be within the
printable area of the page; see Printable Area.
■
Make sure your paper is positioned on the right side of the sheet feeder with the
left edge guide lightly against its left side. Don’t load paper above the arrow on the
left edge guide.
The printer prints blank pages.
■
Make sure your paper settings are correct for your paper size. See see Basic
Windows Printing, Printing With Macintosh OS 8.6 to 9.x, or Printing With
Macintosh OS X.
■
The print head nozzles may need cleaning; see Cleaning the Print Head for
instructions.
Scanning
Your system doesn’t recognize the EPSON Stylus CX3200.
Make sure your Stylus CX3200 is connected to your computer and plugged into a
power source.
The fluorescent lamp isn’t on.
■
The EPSON Stylus CX3200 has a power saving function (sleep mode); it comes
on when you start scanning.
■
Make sure the EPSON Stylus CX3200 is plugged into a power outlet.
The EPSON Stylus CX3200 doesn’t scan.
■
Wait until the fluorescent lamp stays on (ready for scanning). You may need to
preview your scan to make the lamp come on.
■
If you are using a USB hub, try connecting the EPSON Stylus CX3200 directly
to the computer’s USB port. Use only the USB cable that came with your Stylus
CX3200.
■
If you see your EPSON Stylus CX3200 in the Windows Control Panel, but you
can’t scan, uninstall and reinstall its software; see Uninstalling Software.