Specifications

61
The EPSON Stylus CX3200 scanning software doesn’t work properly.
■
Make sure your computer meets the system requirements listed in the
Requirements and Notices booklet and supports the software applications you’re
using.
■
Check if your computer has enough memory for your software. If you’re running
other software at the same time, the computer may not have enough memory. Try
closing any open applications, including screen savers and virus protection
programs.
■
If you’re scanning a large image or scanning at a high resolution, your computer
may not have enough memory to process the image.
■
Check your software installation. If all else fails, uninstall your software, then
reinstall it; see Uninstalling Software.
■
If you’re using the
Scan
button make sure Smart Panel and your operating
system are set up for scanning using the button. Click the
?
button on the Smart
Panel main window for instructions.
Paper
Too many copies are printing.
Make sure that the
Copies
setting in your printer software and/or printing software
aren’t set for multiple copies.
Paper doesn’t feed correctly or jams in the printer.
■
If paper doesn’t feed, remove it from the sheet feeder. Fan the paper, load it
against the right side, and slide the left edge guide lightly against it.
■
If paper jams, turn off your printer, open the scanner, and remove any paper that’s
inside, including any small pieces that may have torn off. Carefully reload paper
and press the
Color Copy
button.
Paper doesn’t eject fully or is wrinkled.
■
If the paper doesn’t eject fully, you may have set the wrong paper size. Press the
Color Copy
button to eject the paper, then select the correct paper size in your
software.