Specifications

Macintosh

This section tells you how to set up the EPSON Stylus CX3200 so that you can print

to it on an AppleTalk network. By setting up the EPSON Stylus CX3200 as a shared

printer, your local printer is connected to the network and can be used by other

computers.

Note: This feature is not available with Mac OS X.

First, you need to set up the EPSON Stylus CX3200 as a shared printer on the

computer to which it is connected. Then, you must specify the network path to the

EPSON Stylus CX3200 from each computer that will use it, and install the printer

software on those computers.

Setting Up a Shared Printer

To share the EPSON Stylus CX3200 with other computers on an AppleTalk

network, follow the steps below to configure the computer to which it is connected.

1. Turn on the EPSON Stylus CX3200.

2. Choose

Chooser

from the Apple menu and click the icon for the EPSON Stylus

CX3200. Then, select the port to which the EPSON Stylus CX3200 is

connected.

3. Click the

Setup

button. The Printer Sharing Setup dialog box opens.

4. Select the

Share this Printer

check box, then type the printer name and

password information as necessary.

5. Click

. The name of the shared printer appears in the port list in the Chooser.

6. Close the Chooser.

Accessing a Networked Printer

To access the EPSON Stylus CX3200 from other computers on a network, follow the

steps in this section for each computer that will access it.

1. Turn on the EPSON Stylus CX3200.

2. Install the printer software from the EPSON Stylus CX3200 CD-ROM.