User`s guide

20 Faxing a Document or Photo
6. Press Menu, if necessary, to adjust any of the following settings:
■ Resolution to increase the scanning resolution of a faxed document
■ Contrast to change the contrast of the faxed document
■ Fax Delay to specify a different time to send your fax. (You cannot send
another fax until the delayed fax has been sent or cancelled.)
■ Fax Mode to select Polling mode to receive a fax from another fax
machine to which you have dialed (such as a fax information service).
Change the setting back to
Sending when you’re finished.
Press
OK when you’re done selecting settings.
7. Press
OK, if desired, to see a summary of your fax transmission settings.
8. Press x
Start to send your fax. To cancel faxing, press y Stop/Clear
Settings
.
If you are scanning with the Automatic Document Feeder, your document is
automatically scanned and faxed.
If you placed your document on the scanner glass, you see this screen after the
first page is scanned:
If you need to fax additional pages, place your original on the scanner glass or
in the Automatic Document Feeder. Then press
OK to continue. If you do not
need to fax another page, press
Back. Your document is faxed.
Note:
If the fax number is busy, you see a redialing message and the CX9400Fax Series
redials after one minute. To redial immediately, press Redial/Pause.