User`s guide

Problems and Solutions 39
■ Make sure the type of paper you loaded matches the paper size and paper type
settings on the control panel when copying (see page 12), when faxing (see
page 21), or in your printer software (see page 30).
■ Use the Automatic Document Feeder to fax or scan legal-size documents, but
not to copy them. Letter-size paper is automatically selected for copying. If
you copy a legal-size document, your image will be cropped.
■ Make sure your original is positioned against the back left corner of the
scanner glass. If the edges are cropped, move your original away from the
edges slightly.
Paper Feeding Problems
If paper doesn’t feed correctly when printing, remove the paper and flip through
the stack to separate the sheets. Reload the paper against the right side and slide
the edge guide against it. Do not load too many sheets at once (see page 4).
If paper has jammed:
1. Press x
Start to eject the jammed paper.
2. If paper is still jammed, gently pull it out from the output tray or sheet feeder.
3. If paper is stuck inside, press the P
On button to turn off the printer. Then
lift the scanner, remove the jammed paper and torn pieces, close the scanner,
and turn the printer back on.
If documents don’t feed correctly in the Automatic Document Feeder, make sure
the corners of the paper are not bent, folded, or curled up. Do not load more than
10 sheets of legal-size paper at a time. If documents have jammed:
1. Open the ADF cover and pull any paper out to the left as shown.
Caution:
Do not try to remove the paper without opening the ADF cover first, or you
could damage the mechanism.