Service manual

EPSON Stylus Photo 870/1270 Revision B
Disassembly And Assembly Disassembly Procedures 89
4.2.6 Ink Unit Removal
NOTE:
Ink Unit consists of the Pump Unit, Cleaner Head, and Cap Assembly.
1. Remove HOUSING. (Refer to Section 4.2.1.)
2. Remove the Panel Unit. (Refer to Section 4.2.3.)
3. Remove TRAY, ABSORBER ASSEMBLY. (Refer to Section 4.2.5.)
4. Remove the three screws (CBS, 3x6) securing the Ink Unit to the
FRAME, MIDDLE.
5. Remove the one screw (CBS, 3x6) securing the Ink Unit to FRAME,
TOP. Then remove the Ink System Assembly.
6. Release the hook fixing the Cap Assembly to the Ink Unit, and then
remove the Cap Assembly.
7. Disconnect the tube from the Cap Assembly.
Figure 4-14. Ink Unit Removal
CBS (3x6)
Ink Unit
Hook in the Cap Assembly
FRAME, MIDDLE CBS (3x6)
CBS (3x6)
FRAME, TOP