User`s guide

Paper Handling 1-7
Note:
❏ Return the adjust lever to the “0” position, which is the normal
position, after you finish printing on envelopes. Leaving the
lever in the “+” position may cause gaps to appear in images
printed on other media.
❏ When the adjust lever is in the “+” position, make sure the High
Speed setting in the printer driver’s Advanced dialog box is off.
To turn this option off, you may also need to change the Print
Quality setting.
❏ Load envelopes flap edge first with the flap side down, as
shown in the illustration.
❏ Do not use envelopes that are curled or folded.
❏ Flatten envelopes before loading.
❏ Avoid using envelopes that are too thin as they may curl
during printing.
❏ Select Plain Paper as the Media Type setting in the printer
software.
Available envelopes sizes are:
No.10, DL, C6, 132 mm
×
220 mm