instruction manual CONTINUOUS INK SYSTEM PermaJ et 2100

UB
LC
C
LK
Y
LM
M
2100 Setup
Step 7 Assembling the Tubing to the Bottle Caps
6
When you have completed the above
process insert the correct tube to the
correct ink bottles. PLEASE TAKE
CARE when doing this as if this is
connected incorrectly there is no
turning back see Fig.9 & Fig.10
Fig.9 Fig.10
Wing Adaptor
Shown
Step 8 Priming the Ink Through the Injectors
You are now ready to start the ink priming process starting
with the YELLOW injector.