Specifications

Epson Stylus Photo RX700
5/05 Epson Stylus Photo RX700 - 13
You see your memory card’s first photo displayed on the
screen:
8. Use the l and r arrow buttons to preview each of your
photos.
9. While a photo is displayed, use the
+ and – buttons to select
how many copies of it you’d like.
Note:
See “Other Ways to View and Select Your Photos” below.
10. When done selecting all your photos for printing, press OK.
11. At the preview screen, press the x
Color button to print
your photos.
To cancel printing, press the y
Stop button.
Note:
For best results, press the
x Color button even if you’re printing
black-and-white photos. Color inks can be combined for improved
results over black ink alone.
If part of your photo is cut off when you print, select with Border
as the Layout setting. Then press the Options button and turn off
Fit to Frame.
Other Ways to View and Select Your
Photos
When previewing your photos, you can choose whether to
view them one-at-a-time or nine per screen. You can also
select photos for printing one-by-one, in a range, or all at
once.
1. After making your print
settings, you see the first
photo on your card. Press
the
Screen View button.
Your photos are displayed
nine per screen.
Note:
Press the Screen View button
again to view your images as a slide show. (You cannot select
the number of prints in this mode.) Press Screen View again to
return to viewing one photo per screen.
2. To select photos one-by-one, use the u, d, l, r arrow
buttons to select each photo, and the
+ and – buttons to
select the number of copies. Press
OK when done making
your selections. Continue with step 8.
3. To select a range of photos, press the
Options button. You
see this screen:
4. Highlight
Select Range, then press OK.
Note:
You can also select or deselect all the photos on the card. When
selecting a range of photos, it is helpful to view them nine per
screen.
5. Move the highlight box to the first photo in the range of
photos you want to print, then press
OK. Then use the
u, d, l, r arrow buttons to highlight additional adjacent
photos. Press
OK when done.
6. By default, each photo in the range is set to print one copy.
If you wish to make additional copies of any photo,
highlight it and use the
+ and – buttons to select the
number of copies.
7. Press
OK when done.
8. At the preview screen, press the x
Color button to print
your photos.
Printing From Other Devices
The RX700 can print photos by directly connecting one of
these devices:
❏ PictBridge or USB Direct Print enabled digital camera
❏ Data storage device, such as a USB thumb drive (flash
memory device), CD-ROM, or Iomega Zip drive
❏ Bluetooth enabled device (requires an optional Bluetooth
Photo Print adapter)
See the Basics book and electronic Reference Guide for more
information.
®
TM
®
®
-