Basic manual

Printing Without a Computer

Changing the Default Settings

The printer comes with the following default settings for each print mode:

You can change the defaults to the settings you use most often.

1. Make the settings you want to use for one of the print modes.

2. Press the

Select Photo

and

Brightness

buttons at the same time. The settings

are saved as defaults, even if you turn off the printer.

3. Repeat steps 1 and 2 for each print mode.

To change back to the factory defaults, first select the print mode you want to change,

then press the

Select Photo

Brightness

, and

Cancel

buttons at the same time.

Note: If you want to select Photo Paper or Photo Quality Ink Jet paper, see

page 22 for instructions.

Index

One

All

Set

VSEDVLFVERRN3DJH:HGQHVGD\-XO\30