Basic manual
71
Installing Your Printer Software
Before installing your printer software, follow the steps on the Start Here sheet to set
up your printer and connect it to your computer.
If you’re using Windows XP, Windows 98, or Mac OS 8.6 to 9.x, follow the software
installation instructions on the Start Here sheet.
If you’re using one of the operating systems below, follow the instructions in this
chapter to install your printer software:
■
“Installing Printer Software on Mac OS X” below
■
“Installing Printer Software on Windows Me” on page 76
■
“Installing Printer Software on Windows 2000” on page 78
Installing Printer Software on Mac OS X
First you’ll install your printer software for OS X applications. You’ll install both a
printer driver and a memory card driver, and restart your Macintosh after each one.
Then you’ll restart your Macintosh in OS 9.x and install your printer software for OS
8.6 to 9.x applications.
Installing the Printer Driver for Mac OS X
1. Start up your Macintosh in OS X. (Make sure your printer is still on.)
2. Put the EPSON CD-ROM in your CD-ROM or DVD drive and wait a few
seconds for the CD-ROM to be recognized.
VSEDVLFVERRN3DJH:HGQHVGD\-XO\30