Product information guide

EPSON Stylus Photo
3/97
EPSON Stylus Photo - 11
Note:
Use ink jet papers within one year of purchase. Use glossy
media and transparencies within six months. Return unused
sheets and envelopes to their original package as soon as
possible, and store away from high temperatures, humidity,
and direct sunlight.
EPSON
4 × 6 Photo Paper
Photo paper (4
×
6) is perforated around the edges, so you
can trim your printouts and “bleed” the photo—extend it to
the edge of the paper—on all sides. Follow these steps to
print on EPSON Photo paper:
1. Load the paper with the whiter side facing up and the
perforated margins positioned as shown:
You can load up to 20 sheets of Photo paper at a time.
Make sure you place the included support sheet beneath
the stack, but don’t print on it.
2. Slide the left edge guide so it fits snugly against the paper.
3. When you create the image in your application software,
size it to 4.25
×
6.25 inches.
4. Choose
EPSON Photo Paper 4
×
6 in
as the
Paper Size
setting and
Maximum
as the
Printable Area
setting
.
5. Choose
Photo Quality Glossy Paper
as the
Media Type
setting.
6. After you print your picture, fold the paper back and forth
along the perforations and carefully tear the margins off.
To keep your printouts looking their best, store them in a
resealable plastic bag or other airtight covering and keep
them away from high temperatures, humidity, and direct
sunlight.
EPSON Photo Quality Glossy Paper, Film, and
Transparencies
Follow these steps to print on glossy media or
transparencies:
1. To print on transparencies only, remove the paper support
and reinstall it in the rear paper support slot, as shown
below. For glossy paper and film, leave the paper support
in the normal position.
2. Before you load the media, place the included support
sheet or a plain paper sheet beneath the stack.
You can load up to 20 sheets of glossy paper, 30 sheets of
glossy film, or 10 transparencies. However, you may get
better results by loading one sheet at a time. With multiple
sheets loaded, the minimum top margin you can use is 1.2
inches.
3. Remember to choose the correct
Media Type
setting in
your printer software, following the guidelines on page 10.
trim size
printed image size
.67 in
.24 in
.12 in
.24 in
.12 in