Product information guide
EPSON Stylus Photo
3/97
EPSON Stylus Photo - 13
Use these EPSON ink cartridges within six months of
installing them and before the expiration date on the
package:
❏ Black ink cartridge: S020093
❏ Color ink cartridge: S020110
Removing an Empty Ink Cartridge
You can replace a cartridge when the
black or color
ink out light is either flashing or on. Follow these steps:
1. Make sure the printer is turned on and not printing.
2. Determine which cartridge needs to be replaced.
Caution:
If you press the
cleaning button when no ink out light is
flashing or on, the printer cleans the print heads as described
on page 14. If you need to replace an ink cartridge before the
lights flash (because the ink is too old, for example) follow
the instructions on
page 14.
3. Lower the output tray and raise the printer cover.
4. Press the
cleaning button and hold it for three seconds.
The print heads move slightly left and the
power light
begins flashing. (The print heads return to their home
position if you don’t proceed to step 5 within 60 seconds.)
5. Pull up the ink cartridge clamp. The cartridge rises up
from its holder. (Although the illustration shows the color
ink cartridge, the procedure is the same for replacing the
black ink cartridge.)
Caution:
Don’t open the clamp or remove a cartridge except to
replace it with a new one. Once you remove a cartridge, you
can’t reuse it. Even if the cartridge contains ink, reusing it
may damage the print head.
6. Lift the cartridge out of the printer and dispose of it
carefully.
Warning:
If ink gets on your hands, wash them thoroughly with soap
and water. If ink gets into your eyes, flush them
immediately with water.
7. Follow the steps in the next section to install the new ink
cartridge.
Installing the New Cartridge
Once you have removed the empty cartridge, you’re ready
to install the new one. Follow these steps:
1. Remove the new ink cartridge from its packaging.
2. Remove the yellow tape seal as shown:
Caution:
You must remove the yellow tape seal from the top of the
cartridge; leaving the tape on will permanently damage the
cartridge. Do not remove the clear seal from the bottom of
the cartridge; ink will leak out.
3. Lower the ink cartridge into its holder with the label
facing up and the arrow pointing to the back of the printer.
The larger cartridge (color) goes on the right, the black ink
cartridge on the left.
black cartridge
color cartridge










