User's Manual

Introduction
2
Windows System Requirements
To use your printer and its software with a PC, your system
should have:
◗ An IBM
®
compatible PC with at least a 486 DX2/66 MHz
or faster processor
◗ DOS, Windows
3.1x, Windows for Workgroups 3.11, or
Windows 95
◗ At least 16MB of RAM
◗ At least 50MB of free hard disk space for storing images
◗ VGA, Super VGA, or better display adapter and monitor
◗ Double-speed CD-ROM drive (quad-speed or faster
recommended)
◗ A shielded, twisted-pair parallel cable (6 to 10 feet long) to
connect your computer to the printer; the cable must have
a D-SUB, 25-pin, male connector for your computer and a
36-pin, Centronics
®
compatible connector for the printer.
Macintosh System Requirements
To use your printer and its software with a Macintosh, your
system should have:
◗ Any Macintosh or Power Macintosh model except the
Macintosh Classic, Macintosh +, Macintosh 512, or
PowerBook
™
100
◗ System 7.1 or later
◗ At least 16MB of built-in RAM
◗ At least 50MB of free hard disk space for storing images
◗ VGA (8-bit, 640
× 480) or better display adapter and
monitor
Note:
If you don’t have a
CD-ROM drive, you can
get the printer driver
software on diskettes or
download it through
your modem. Contact
EPSON as described on
pages 4 and 5.
intro.fm5 Page 2 Friday, April 4, 1997 8:25 AM