User's Manual

Basic Printing
1-4
Setting Default Printer Options
When you change printer settings through your software
application, the settings apply only to the application you’re
using. If you want to adjust the default settings for all your
Windows applications, you can access the dialog box through
the Windows 95 Settings option or the Windows 3.1 Control
Panel.
Make sure all your software applications are closed before you
start. If not, you’ll have to close and then reopen them to have
the new default settings take effect.
Setting Default Options in Windows 95
Follow these steps:
1. Click
Start, point to Settings, and then point to Printers.
2. Right-click the
EPSON Stylus Photo icon.
3. Select
Properties. Then click the Main tab.
You see the Main printer settings dialog box, as shown on
page 1-2. Any changes you make will become the default
settings for all your applications and documents.
Setting Default Options in Windows 3.1
Follow these steps:
1. Double-click the
Control Panel icon in the Main group.
2. Double-click the
Printers icon.
3. Select
EPSON Stylus Photo from the list of printers and
click
Setup.
You see the Main printer settings dialog box, as shown on
page 1-2. Any changes you make will become the default
settings for all your applications and documents.
Note:
Some application settings
override printer settings
(such as Paper Size or
Orientation), so it’s a
good idea to check
the settings in your
application before
you print.
basic.fm5 Page 4 Wednesday, April 2, 1997 3:22 PM