User's Manual

Basic Printing
1-7
5. Make sure the Mode option is set to
Automatic. The
printer software determines the best settings for your print
job. This is the easiest way to get good printing results on
all types of paper.
6. Choose the
Media Type you want to print on from the
following list. If you are not sure which setting to select,
refer to the table on page 3-2.
◗ Plain Paper
◗ 360 dpi Ink Jet Paper
◗ Photo Quality Ink Jet Paper
◗ Photo Quality Glossy Paper
◗ Photo Quality Glossy Film
◗ Ink Jet Transparencies
The type of media you choose determines the print quality
or resolution you can use.
7. Choose
Color or Black ink. If you’re printing grayscale
images, choose
Black for faster output.
8. Set the slider to
Quality or Speed. This lets you choose
between the highest resolution or fastest printing for the
media you’re using. (The slider is not available for certain
media types.)
9. Click
Print when you’re finished checking your settings.
If you chose background printing when you set up your
printer, you can continue working while your document is
printing. See “Using Monitor2” in Chapter 4.
If you click Advanced
instead of Automatic,
you can choose
PhotoEnhance from
the list of modes. See
Chapter 2 for more
information.
basic.fm5 Page 7 Wednesday, April 2, 1997 3:22 PM