User's Manual

Managing Print Jobs and Network Printing
4-4
4. In the dialog box, change the spool directory to the one you
created in step 1. Then click
OK.
5. Make sure
EPSON Stylus Photo is selected, and then choose
Setup from the Queue menu. The Queue Setup dialog box
appears.
6. Make sure the spool directory is the one you created in
step 1. Also make sure
Use Print Manager for this port is
checked. Then click
OK. (If you are using Windows 95 and
don’t see the Status Monitor when you print, make sure it’s
unchecked.)
7. Close Spool Manager.
Using the Status Monitor
The Status Monitor, available only if you’re using Windows 95,
displays automatically when you send a job to the printer.
However, you can use it at any time to see how much ink you
have left. Follow these steps:
1. Access the Main printer settings dialog box as described on
page 1-2.
2. Click the
Utility tab.
printjob.fm5 Page 4 Friday, April 4, 1997 9:34 AM