User Setup Information

Connecting to a Macintosh
1. Turn off the printer and your Macintosh.
2. Connect one end of the cable to the serial connector on
the back of the printer.
3. Connect the other end of the cable to either the modem
port or the printer port on your Macintosh.
Install the Software
Your EPSON Digital Darkroom CD-ROM includes the software
for both Windows
®
and Macintosh.
®
You must install the printer
driver software for the printer to work correctly.
Before your start, make sure both your computer and the printer
are turned off.
Note:
If you’re using a
PowerBook
™
, connect your
printer to the modem port.
If your Macintosh has an
internal modem, use the
printer port.
Installing the Software for Windows
1. Turn on the printer first, then your computer. Make sure
Windows 95 or Windows 3.1 is running.
If the Windows 95 New Hardware Found screen appears,
choose Do not install a driver and click OK.
2. Insert the EPSON Digital Darkroom CD-ROM in your drive.
The EPSON Digital Darkroom main screen appears.
If the EPSON Digital Darkroom doesn’t open automatically
in Windows 95, double-click My Computer, then
double-click your CD-ROM icon.
Note:
If you don’t have a
CD-ROM drive, you can
get the printer driver
software on diskettes or
download it through your
modem. Check out
EPSON’s Home Page at
http://www. epson.com.
For more information, see
your
User’s Guide
Introduction.
Quick setup Comoro 5/22/97, 10:18 AM7