Operation Manual

Scanning Film or Slides to a Memory Card 111
2. Place slides in the film holder as shown, with the duller (emulsion) side
facing up.
Note:
If your slide image is in landscape orientation (wider than it is long), place it in the
same direction as slide images in portrait orientation (longer than they are wide).
This copies the maximum image area, but your preview will be rotated.
3 Close the scanner lid.
Scanning and Saving to Your Memory Card
1. Press the Film Print button to set the RX600 to Film Print mode.
2. Use the u and d buttons to choose
Scan to Memory Card.
3. Press the OK button.
Make sure the top of
images with portrait
orientation face the
front of the RX600
sprx600usersguide.book Page 111 Wednesday, February 25, 2004 1:47 PM