Operation Manual

118 Printing and Scanning Without a Computer
You can go back and change settings at any time by opening PhotoStarter. Open
the
EPSON PhotoStarter 3 folder, then double-click EPSON
PhotoStarter 3
. Open the Tools menu and choose Change Settings.
Preparing Your Computer to Remove a Memory
Card
Once you’re finished copying photos from your memory card, follow the steps
below to prepare your computer before removing it. Be sure to remove any cards
before unplugging the USB cable from your printer.
Caution:
Do not eject a card while the memory card light is flashing, or without performing the
steps described below, or you may lose data on the card. Be sure all cards have been
removed before unplugging the USB cable.
1. On a Macintosh, drag the memory card icon from your desktop to the trash.
If you’re using Windows XP or 2000, click the
Unplug or Eject
Hardware
icon on the taskbar. In Windows XP, click Safely Remove USB
Mass Storage Device
. In Windows 2000, click Stop USB Mass Storage
Device
.
Note:
In Windows 98 or Me, you don’t need to do anything on your computer before
removing a card.
2. Remove the card by pulling it straight out of the slot.
sprx600usersguide.book Page 118 Wednesday, February 25, 2004 1:47 PM