Operation Manual

120 Printing From Other Devices
Printing From a Digital Camera
PictBridge and USB Direct Print allow you to print your photos by connecting
your camera to the Stylus Photo RX600.
1. Remove any memory cards from the RX600. (If you leave a card in the
printer, photos will be read from the memory card in the RX600 instead of
your camera.)
2. Connect the USB cable from your camera to the
EXT I/F USB port on the
front of the Stylus Photo RX600. Some digital cameras require a special USB
cable; if so, be sure to use the one that came with the camera.
3. Turn on the Stylus Photo RX600 and your camera. After a moment, the
Stylus Photo RX600 reads and counts the number of photos in your camera.
4. Press the
Setup button to set the RX600 to Setup mode.
5. Use the d button to highlight
Direct print image set.
6. Press the
OK button.
7. Choose the Paper Type, Paper Size, Layout, Resolution, and other print
settings (see page 90 for details).
8. When you have finished selecting print settings, press
OK.
9. Use the camera controls to print your photos. See your camera documentation
for printing instructions.
Note:
If your camera is not compatible with PictBridge or USB Direct Print, you’ll see a
message saying that the connected device cannot be used. Epson cannot
guarantee the compatibility of any cameras.
EXT/IF USB
port
sprx600usersguide.book Page 120 Wednesday, February 25, 2004 1:47 PM