Operation Manual

132 Maintaining the RX600
Checking the Ink Supply
To check your ink supply, do the following:
1. Press the
Setup button to enter setup mode.
2. Press the u and d buttons to select
Ink Levels.
3. Press the
OK button.
You see a graphic showing the amount of ink available in each cartridge:
B (Black) C (Cyan), LC (Light Cyan), M (Magenta), LM (Light Magenta),
and
Y (Yellow).
4. When you’re done checking the ink levels, press the
OK button.
When your ink starts getting low, make sure you have replacement cartridges
available. You can’t print if a cartridge is empty.
Purchasing Ink Cartridges
Use these Epson ink cartridges within six months of installing them and before the
expiration date:
Caution:
To ensure good results, use genuine Epson ink cartridges and do not refill them. Other
products may cause damage to your Stylus Photo RX600 not covered by Epson’s
warranty.
When you need new ink cartridges, contact your dealer, or call the Epson Store at
[phone] or visit www.epsonstore.com (U.S. sales only). In Canada, call
[phone] for dealer referral.
Color Part number
Black T048120
Cyan T048220
Magenta T048320
Yellow T048420
Light Cyan T048520
Light Magenta T048620
sprx600usersguide.book Page 132 Wednesday, February 25, 2004 1:47 PM