Operation Manual

28 Copying
Lightening or Darkening Copies
1. Press the Menu button to display the Copy Menu on the RX600 screen.
2. Press the d button to choose C
opy Density.
3. Press the l button to lighten or the r button to darken your copies.
4. Press the
OK button to go back to the additional copy settings.
Restoring Color as You Copy
You can bring an old 4 × 6-inch photo back to life as you copy it onto Premium
Glossy Photo paper. (You can restore only 4 × 6-inch photos using this method.)
1. Press the
Menu button to display the Copy Menu on the RX600 screen.
2. Choose
Copy Layout with the u and d buttons and use the l and r buttons
to select
Multi-Photo.
3. Press the
OK button. You see a layout screen.
4. Press the
OK button again. You see the Multi-Photo menu.
5. Press the d button to choose
Restoration.
6. Press the l button to choose
On. Your photo paper type and size are selected
automatically.
7. Press the x
Color button and follow the instructions on the RX600 screen to
copy and restore your photo.
Note:
If you see an error message telling you the RX600 can’t detect your original photo,
make sure the photo size is 4 × 6 inches. If you placed more than one photo on the
scanner glass, make sure they are at least 1 inch apart.
To restore the color in an old film strip photo or slide as you copy it in Film Print mode,
see page 101. To restore colors to photos as you scan them, see page 68.
sprx600usersguide.book Page 28 Wednesday, February 25, 2004 1:47 PM