Operation Manual

Restoring Color in Faded Photos 69
Note:
If you place your photo or document against the edge of the glass, the edges of
your photo or document may not be copied.
To copy a thick document, you can remove the scanner lid. Turn off
the RX600 and open the scanner lid completely. Disconnect the
cord from the TPU connector and pull the lid straight up. Turn on
the RX600 and gently press down the original to keep it flat on the
glass as you copy. When you’re finished, turn off the RX600
before replacing the scanner lid and plugging in the connector.
Scanning Your Photo
1. Do one of the following:
■ In Windows, select Start > All Programs or Programs > EPSON
Scan
> EPSON Scan.
■ On a Macintosh, double-click EPSON Scan in the Applications folder.
2. Epson Scan starts previewing your image in Full Auto Mode. To switch
modes, click the
Pause button at the bottom of the screen.
3. Select
Professional Mode from the Mode menu at
the top of the screen.
Click Pause
sprx600usersguide.book Page 69 Wednesday, February 25, 2004 1:47 PM