Operation Manual

90 Printing and Scanning Without a Computer
Printing Your Selected Photos
Once you’ve selected your photos, you need to select your print settings. Follow
the steps in these sections:
■ “Selecting the Type, Size, Layout, and Quality” below
■ “Selecting the Correct Paper Type” on page 91
■ “Selecting Special Print Settings” on page 92
■ “Saving and Reusing Print Settings” on page 93
■ “Restoring Default Settings” on page 93
Selecting the Type, Size, Layout, and Quality
1. Press the u and d buttons to highlight Paper Type, then press the l and r
buttons to choose the type of paper that is loaded in the printer.
(If you’re not
sure about the paper type, see the table on page 91.)
Note:
It’s important to select the correct Paper Type setting for the paper you’re using, or
the print quality may not be what you expect.
2. Press the u and d buttons to highlight Paper Size, then use the l and r
buttons to select the size of paper you’ve loaded.
3. Use the u and d buttons to highlight
Layout, then use the l and r buttons
to select one of the following:
BorderFree: one photo per sheet, borderless; fits the photo lengthwise
With Border: one photo per sheet, with borders around the edges
Upper 1/2: one photo on the top half of the sheet
2-up: two photos per sheet
4-up: four photos per sheet
8-up: eight photos per sheet
20-up: 20 photos per sheet; the photo number and date are also printed
Greeting Card: one photo per sheet, for the front of the greeting card
sprx600usersguide.book Page 90 Wednesday, February 25, 2004 1:47 PM