Operation Manual

Printing Your Selected Photos 93
Saving and Reusing Print Settings
You can save one set of custom print settings so you can quickly reuse it for a
similar printing job (for example, 5 × 7-inch photos on Premium Glossy Photo
paper). You can then “reprint” photos by pressing a single button.
■ After selecting settings, press and hold the Recall button until you see The
current setting has been saved on the LCD screen
, then press the OK
button.
■ To use your saved settings, press the Recall button until you see Recalled on
the RX600 screen, then press the
OK button.
If you want to save a different group of settings, repeat step 1. This will replace
your previously saved settings.
Restoring Default Settings
If you want to reset print and copy settings to their original default settings, follow
these steps:
1. Press the
Setup button.
2. Use the u and d buttons to choose
Restore to Factory Settings.
3. Press
OK, then press OK again to restore your settings.
4. You see a confirmation that settings have been restored. Press the
OK button.
sprx600usersguide.book Page 93 Wednesday, February 25, 2004 1:47 PM