Operation Manual

The Control Panel 26
User’s Guide
HEAD ALIGNMENT
You can perform print head alignment. For more details for the print head alignment, see the following
section.
“Print head alignment” on page 138
NETWORK SETUP
This menu contains the following items. For detailed information about network settings, see the
Administrator’s Guide.
Item Parameter Explanation
PAPER THICKNESS SELECT PAPER TYPE When using Epson special media, select the paper
type. If you use non-Epson special media, enter the
paper thickness in the range of 0.1 to 1.5 mm.
SELECT THICKNESS
ALIGNMENT AUTO When you select AUTO, the adjustment pattern for
output is read by the sensor and the optimum
adjustment value is registered automatically in the
printer. When you select MANUAL, you need to check the
pattern and enter the value for alignment.
MANUAL
Item Parameter Explanation
NETWORK SETUP DISABLE You can configure the network setting of the printer. The
following items appear only when ENABLE is selected.
After setting the items, press the button in the
Network Setup menu, so the network is reset and the
network connection is available after 15 seconds. The
Network Setup menu does not appear while resetting
the network.
ENABLE
IP ADDRESS SETTING AUTO You can select the method to set the IP address to the
printer. When you select PANEL, IP, SM, DG SETTING
appears.
PANEL
IP, SM, DG SETTING Ask your system administrator for detailed information.
BONJOUR ON You can enable or disable the Bonjour setting.
OFF
INIT NETWORK SETTING EXECUTE You can return the network settings of the printer to the
factory default value.