Operation Manual

Paper Handling 36
User’s Guide
Loading cut sheet media
longer than Super A3/B
(483 mm)
A
Turn on the printer by pressing the
button.
B
Press the button repeatedly until Sheet
appears.
C
Make sure that the roll paper cover is
closed.
D
Make sure that the Paper Check light is on,
and then set the paper lever to the released
position. LEVER RELEASED. LOAD PAPER
appears on the LCD panel.
The paper lever may be locked if REMAINING
PPR SETUP is set to ON: AT ROLL EXCHANGE.
In this case, press and hold the button
for 3 seconds to print the barcode, so you
can release the paper lever.
E
Load the sheet into the paper insertion slot
until it comes out below.
c
Caution:
Do not set the paper lever to the released
position while the Power light or Pause
light is flashing; otherwise, damage may
occur.
Note:
Load the sheet vertically, like most magazines.