Operation Manual

Printing with Windows 49
EPSON Stylus Pro 3800 User’s Guide
4. Click Print Nozzle Check Pattern in the Head Cleaning dialog box to confirm that the
head is clean and to reset the cleaning cycle.
If you still find missing dots after cleaning, try the following solutions.
❏ Select POWER CLEANING from the control panel on the printer. See “POWER
CLEANING” on page 107.
❏ Repeat this procedure four or five times, turn the printer off and leave it alone overnight,
and then try head cleaning again.
❏ Replace some of ink cartridges as they may be old or damaged.
If the print quality remains a problem after you have tried these solutions, contact your
dealer. See “Contacting Customer Support” on page 174.
Aligning the print head
If you find misaligned lines or black or white banding on the printed data, you may be able
to solve these problems by using the Print Head Alignment utility to align the print head.
To use the Print Head Alignment utility, follow the steps below.
1. Make sure that the printer is on and EPSON special sheet of A4/Letter size or larger
paper is loaded in the printer.
2. Click Print Head Alignment.
3. Follow the on-screen instructions to align the print heads.
Starting EPSON LFP Remote Panel
You can optimize your printer using this utility. To start EPSON LFP Remote Panel, see the
steps below.
1. Make sure the printer is turned on.
2. Click EPSON LFP Remote Panel.
3. Follow the on-screen instructions. See the EPSON LFP Remote Panel online help for
details.