User Guide

5-95
Maintaining and Transporting the Printer | 95
6. Press Enter, and the printer starts printing.
Head alignment pattern examples:
7. After printing is finished, the pattern number and current set number
are displayed. Select the set that has the smallest gaps, and then press the
d or u button to display the number for that set.
8. Press Enter to register the set number. The next pattern number
appears. Then repeat step 7.
9. After you set the pattern, the printer exits Menu mode and returns to
the
READY status.
Replacing Ink Cartridges
Before you begin a large print job, you should check your ink levels. If one of
your cartridges is low, you can replace it before you start. Or you can wait
until the ink cartridge needs to be replaced, and then continue the job
without any loss of print quality. However, it is best to replace a low ink
cartridge before starting a large print job.