Network Guide

Network Software 35
SNMP
Community
IP Trap
IPX Trap
Printing Control
Items Descriptions
Community Displays the community name.
Read Only The word “public” always appears.
Read/Write Enter the Read/Write community name (up to 32 characters).
Items Descriptions
Trap Enable or Disable trap.
Address Enter the IP address of the server to which the trap is transmitted.
Community Enter the community name (up to 32 characters).
Port Number Enter the Port Number of the receive host, in decimal (0-65535).
Items Descriptions
Trap Enable or Disable trap.
Address Enter Network Address and Node Number (MAC Address) of
the server to which the trap is transmitted.
Format:
Network Address: Node Number
Suppose Network Address is A7E00BB0 (hexadecimal) and
Node Number is 000048930000 (hexadecimal). In this case, the
address is A7E00BB0:000048930000.
Community Enter the community name (up to 32 characters).
Socket Number Enter the Socket Number of the receive host, in hexadecimal
(0-FFFF).
Items Descriptions
Printing Control Enable or Disable printing control.
Printer Access Control Select Allow or Deny. Selecting Allow permits the network
access from the IP addresses registered on the printer access
control list. On the other hand, selecting Deny blocks the
network access from the IP addresses registered on the printer
access control list.
Printer Access Control List Enter the IP address ranges by which the network access is
restricted.