Network Guide

36 Network Software
Timeout
Printing
Time
Manual Settings
If the network interface has RTC (Real Time Clock), you can set the time manually.
Time Server Settings
Items Descriptions
Change Timeout Value Select this checkbox when you set the values before a timeout
occurs.
LPR Set the length of time for LPR before a timeout occurs (between 0
and 3600 seconds). Enter 0 not to apply the timeout.
RAW (Port9100) Set the length of time for RAW (Port9100) before a timeout occurs
(between 0 and 3600 seconds). Enter 0 not to apply the timeout.
IPP Set the length of time for IPP before a timeout occurs (between 0
and 3600 seconds). Enter 0 not to apply the timeout.
Items Descriptions
Time Displays the time. Click the Get Time button to reload the display.
When Time Server is Enable, time is acquired from the time server.
Items Descriptions
Date Enter the year, month, and day.
Time Enter the hour, minutes, and seconds.
Time Difference Enter the difference between time at the present location and
Greenwich Mean Time (GMT).
Apply button Applies the settings.
Items Descriptions
Time Server Select either Enable or Disable to time synchronize from the time
server.
Time Server Address Enter the address of the time server.
Synchronize Interval Enter the time interval in minutes for automatic time synchronization.
Time Difference Enter the difference between time at the present location and
Greenwich Mean Time (GMT).
Time Server Status Displays a connection status with the time server.
Apply button Applies the settings.