L R41AA177P (A+) User`s Guide FRONT.fm 7/27/07 Rev. C A5 size Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk COPY.fm 7/27/07 Rev. C A5 Size Urheberrechte und eingetragene Marken Kein Teil dieses Handbuchs darf in irgendeiner Form (Elektronisch, Druck, Fotokopie, Mikrofilm oder ein anderes Verfahren) ohne die schriftliche Genehmigung der Seiko Epson Corporation reproduziert oder unter Verwendung elektronischer Systeme verarbeitet, vervielfältigt oder verbreitet werden.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas COV_2.fm 7/27/07 Rev.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk ALL.TOC 7/27/07 Rev. C A5 Size Inhaltsverzeichnis Urheberrechte und eingetragene Marken Inhaltsverzeichnis Sicherheitshinweise Wichtige Sicherheitshinweise. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Warnung, Vorsicht und Hinweis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Bei der Auswahl eines Standorts für dieses Produkt. . . . . . . . . . . . . .
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk ALL.TOC 7/27/07 Rev. C A5 Size Kapitel 2 Verwendung der Druckersoftware (Mac OS X) Anleitung Druckersoftware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Druckertreiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 EPSON Printer Utility2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 EPSON StatusMonitor. . . . . . .
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk ALL.TOC 7/27/07 Rev. C A5 Size Posterdruck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Die Blätter entlang der Führungslinien verbinden . . . . . . . . . . . . . 115 Drucken auf benutzerdefiniertem Papier . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk ALL.TOC 7/27/07 Rev. C A5 Size Anderes Papier als Epson-Spezialmedien verwenden . . . . . . . . . . 194 Verwendung von Rollenpapier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Rollenpapier an der Spindel anbringen. . . . . . . . . . . . . . . . . . . . . . . 195 Abstandhalter an der Spindel anbringen . . . . . . . . . . . . . . . . . . . . . 197 Rollenpapier von der Spindel abnehmen . . . . . . .
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk ALL.TOC 7/27/07 Rev. C A5 Size Papierstaus beheben. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 So erreichen Sie unseren Kundendienst . . . . . . . . . . . . . . . . . . . . . . 290 Papierinformationen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 Rollenpapier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SAFE.fm 7/27/07 Rev. C A5 Size Sicherheitshinweise Wichtige Sicherheitshinweise Lesen Sie diese Anleitung, bevor Sie dieses Produkt benutzen. Beachten Sie sämtliche Warnungen und Hinweise, die auf dem Drucker angebracht sind. Warnung, Vorsicht und Hinweis w c Warnungen müssen befolgt werden, um Verletzungen zu vermeiden. Vorsicht müssen befolgt werden, um Schäden am Gerät zu vermeiden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SAFE.fm 7/27/07 Rev. C A5 Size ❏ Stellen Sie dieses Gerät nahe einer Wand auf, an der der Netzstecker schnell herausgezogen werden kann. ❏ Wenn Sie einen Ständer verwenden, muss dieser mindestens 50 kg (110,3 lb) tragen können. Wenn Sie dieses Produkt aufstellen ❏ Blockieren und decken Sie nicht die Öffnungen dieses Produktes ab. ❏ Stecken Sie keine Gegenstände in die Schlitze hinein.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SAFE.fm 7/27/07 Rev. C A5 Size ❏ Wenn Sie mit diesem Produkt ein Verlängerungskabel verwenden, darf die gesamte Amperezahl der angeschlossenen Geräte die Amperezahl des Verlängerungskabels nicht überschreiten. Die gesamte Amperezahl aller angeschlossenen Geräte darf die Amperezahl der Netzanschlussdose nicht überschreiten. ❏ Versuchen Sie nicht, dieses Produkt selbst zu reparieren.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SAFE.fm 7/27/07 Rev. C A5 Size Verwendung des Geräts ❏ Greifen Sie nicht während des Druckvorgangs in das Gerät und berühren Sie nicht die Tintenpatronen. ❏ Berühren Sie nicht die Druckköpfe mit der Hand; ansonsten können Sie dieses Produkt beschädigen. ❏ Schalten Sie das Gerät immer mit der Taste Netzschalter auf dem Bedienfeld aus. Wenn Sie diese Taste drücken, blinkt die Lampe Pause kurz auf und erlischt.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SAFE.fm 7/27/07 Rev. C A5 Size ❏ Verwenden Sie keine Tintenpatronen, bei denen das Mindesthaltbarkeitsdatum abgelaufen ist. ❏ Verbrauchen Sie die Tintenpatrone innerhalb von sechs Monaten nach Einsetzen, um optimale Ergebnisse zu erzielen. ❏ Zerlegen Sie nicht die Tintenpatronen und versuchen Sie nicht, sie nachzufüllen. Dadurch können Sie den Druckkopf beschädigen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SAFE.fm 7/27/07 Rev. C A5 Size Transport des Geräts ❏ Vor dem Transport des Druckers schalten Sie zuerst den Drucker aus und stellen Sie sicher, dass die Druckköpfe in der Ausgangsposition stehen (ganz rechts). ENERGY STAR® Compliance Als ENERGY STAR® Partner hat Epson festgelegt, dass dieses Produkt die Anforderungen der ENERGY STAR® Richtlinien für den energetischen Wirkungsgrad erfüllt.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTW.fm 7/27/07 Rev. C A5 Size Kapitel 1 Verwendung der Druckersoftware (Windows) Anleitung Druckersoftware Die CD-ROM mit der Druckersoftware enthält die folgenden Software. Weitere Informationen zu jeder Software finden Sie in dem Installationshandbuch zur Installation der Software und die Online-Hilfe.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size ❏ Legt die Druckeinstellungen fest wie Medientyp und Papiergröße. Sie haben die Möglichkeit, die Benutzereinstellungen zu registrieren, sowie die registrierten Einstellungen zu importieren oder exportieren. ❏ Führt die Wartungsfunktionen des Druckers aus und stellt den Druckertreiber unter der Registerkarte Utility ein. Auch diese Druckereinstellungen können Sie importieren oder exportieren.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTW.fm 7/27/07 Rev. C A5 Size EPSON-Statusmonitor3 Dieses Utility liefert Informationen zum Druckerstatus wie z. B. Füllstand der Tintenpatrone und die freie Kapazität des Wartungstanks und prüft auf Druckerfehler. EPSON Status Monitor 3 ist automatisch mit dem Druckertreiber installiert.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Druckertreiber aufrufen Sie können Druckertreiber wie folgt aufrufen: ❏ Aus einer Windows-Anwendung ❏ Über das Symbol des Druckers Aus einer Windows-Anwendung Rufen Sie den Druckertreiber aus Ihrer Anwendung heraus auf, wenn Sie die Druckeinstellungen vornehmen. Folgende Prozeduren können sich je nach Anwendung unterscheiden. 1. Wählen Sie im Menü Drucken oder Seite einrichten aus.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 2. SOFTW.fm 7/27/07 Rev. C A5 Size Stellen Sie sicher, dass Ihr Drucker ausgewählt ist, und klicken Sie auf Drucker, Setup, Optionen, Eigenschaften oder Einstellungen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Das Fenster des Druckertreibers wird geöffnet. Nehmen Sie die notwendigen Einstellungen vor und starten Sie den Druckvorgang.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Über das Symbol des Druckers Wenn Sie Einstellungen vornehmen oder eine Druckerwartung (zum Beispiel einen Düsentest oder eine Druckkopfreinigung) ausführen, greifen Sie auf den Druckertreiber über das Symbol für den Drucker zu. 1. Öffnen Sie den Ordner Drucker und Faxe oder Drucker.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 2. R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Klicken Sie mit der rechten Maustaste auf das Symbol des Druckers und dann auf Druckeinstellungen. Das Fenster des Druckertreibers wird geöffnet. Die hier von Ihnen vorgenommenen Einstellungen sind jetzt die Standardeinstellungen für den Druckertreiber.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Benutzung der Online-Hilfe Sie können wie folgt eine ausführliche Erläuterung anzeigen. ❏ Klicken Sie mit der rechten Maustaste auf das Element und klicken Sie dann auf Hilfe.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size ❏ Für Windows XP/2000 klicken Sie auf die Schaltfläche oben rechts im Fenster des Druckertreibers und klicken Sie dann auf das Element.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTW.fm 7/27/07 Rev. C A5 Size Grundeinstellungen Dieser Abschnitt zeigt Ihnen, wie Sie Ihre Daten mit dem Epson Druckertreiber aus einer Anwendung heraus drucken können. Druckertreiber einstellen Erstellen Sie zunächst die Daten, die Sie über die Anwendungssoftware drucken möchten. Öffnen Sie vor dem Drucken das Fenster für den Druckertreiber und bestätigen Sie die Druckeinstellungen wie Medientyp und Papiergröße.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Druckerstatus überprüfen Wenn Sie einen Druckauftrag absenden, können Sie den Druckstatus in den folgenden Fenstern verfolgen. Fortschrittsbalken Der Fortschrittsbalken erscheint auf Ihrem Display, sobald Sie den Druck gestartet haben.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTW.fm 7/27/07 Rev. C A5 Size Fenster Warteschlange Sie können hier die Liste sämtlicher Druckaufträge mit ihren Informationen überprüfen und ebenso Druckaufträge löschen. Das Fenster mit den Duckaufträgen erscheint, sobald Sie das Symbol für den Drucker in der Aufgabenleiste mit einem Doppelklick anklicken. Dies ist eine Funktion des Windows Betriebssystems.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTW.fm 7/27/07 Rev. C A5 Size Druck über Computer abbrechen Drucken abbrechen Klicken Sie auf Stopp in dem Dialogfeld des EPSON Fortschrittsbalkens. Hinweis: ❏ Der Fortschrittsbalken zeigt den Stand des aktuellen Druckauftrags. Die Anzeige erlöscht, sobald der Auftrag an den Drucker gesendet wurde. ❏ Sie können einen bereits an den Drucker abgesendeten Druckauftrag nicht mehr löschen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Druckauftrag in der Warteschlange löschen. Sie können die Druckaufträge in der Warteschlange des Computers löschen. 1. Doppelklicken Sie auf das Symbol für den Drucker in der Taskleiste. 2. Im Druckermenü wählen Sie Alle Dokumente löschen aus. Wenn Sie einen bestimmten Druckauftrag löschen möchten, wählen Sie diesen Auftrag aus und wählen anschließend Löschen in dem Dokumentenmenü aus.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Auftretendes Problem während des Druckens Wenn während des Druckens ein Fehler auftritt, erscheint im EPSON Status Monitor Fenster eine Fehlermeldung. Klicken Sie auf Wie Sie und der EPSON Status Monitor führt Sie Schritt für Schritt durch die Fehlerbehebung.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTW.fm 7/27/07 Rev. C A5 Size Druckerhilfsprogramme verwenden Mit den Epson-Drucker-Utilitys können Sie den aktuellen Druckerstatus prüfen und Wartungsvorgänge vom Computer aus vornehmen. Düsentest Mit diesem Hilfsprogramm können Sie die Düsen des Druckkopfes testen und reinigen, falls sie verstopft sind.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTW.fm 7/27/07 Rev. C A5 Size Druckkopf-Justage Dieses Utility dient zur Verbesserung der Druckqualität der Druckdaten. Die Ausrichtung des Druckkopfs ist gegebenenfalls erforderlich, wenn die vertikalen Zeilen nicht mehr richtig ausgerichtet sind oder es zu weißer oder schwarzer Streifenbildung in den Druckdaten kommt. Verwenden Sie dieses Utility zum Ausrichten des Druckkopfs.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTW.fm 7/27/07 Rev. C A5 Size Export oder Import Sie können die Druckertreibereinstellungen importieren oder exportieren. Diese Funktion kann verwendet werden, wenn Sie dieselben Druckertreibereinstellungen für verschiedene Computer verwenden. EPSON LFP Remote Panel Verwenden Sie dieses Utility zur Optimierung des Druckers. Dieses Utility können Sie nur dann verwenden, wenn es auch installiert ist.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Auf EPSON-Status Monitor 3 zugreifen Öffnen Sie das Fenster für den Druckertreiber und klicken Sie auf die Registerkarte Utility. Anschließend klicken Sie auf EPSON Status Monitor 3. Hinweis: In dem Dialogfeld für die Überwachungsfunktionen wählen Sie das Shortcut Symbol aus, um es sich in der Windows Taskleiste anzeigen zu lassen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Informationen im EPSON-Statusmonitor 3 anzeigen Der EPSON Status Monitor 3 versorgt Sie mit Druckerinformationen, einer grafischen Anzeige der Tintenstände, der Kapazität des Wartungstanks und der Statusanzeige. Wenn während des Druckens ein Fehler auftritt, erscheint eine Fehlermeldung. Lesen Sie die Meldung und beheben Sie das Problem entsprechend.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Zugreifen auf die Überwachungsoptionen Öffnen Sie das Fenster für den Druckertreiber und klicken Sie auf die Registerkarte Utility. Anschließend klicken Sie auf Überwachungsfunktionen. Hinweis: In dem Dialogfeld für die Überwachungsfunktionen wählen Sie das Shortcut Symbol aus, um es sich in der Windows Taskleiste anzeigen zu lassen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Ansicht der Informationen im Überwachungsfenster In dem Dialogfeld für die Überwachungsfunktionen können Sie Fehlertypen auswählen, über die Sie benachrichtigt werden möchten. Sie können ein Shortcut Symbol erstellen und die gemeinsamen Druckereinstellungen überwachen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Druckersoftware deinstallieren In diesem Abschnitt wird beschrieben, wie Sie die Druckersoftware deinstallieren. Hinweis: ❏ Bei Windows XP/Vista müssen Sie sich als Administrator anmelden. Bei der Deinstallation fordert Sie Windows Vista eventuell zur Eingabe eines Passwortes auf. Geben Sie dann das Passwort ein und fahren Sie fort.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size 3. Wählen Sie die EPSON Printer Softwareaus und klicken Sie auf Ändern/Entfernen (oder Deinstallieren/Ändern). 4. Wählen Sie den Zieldrucker aus und klicken Sie auf OK. 5. Führen Sie die angezeigten Anweisungen aus, um die Deinstallation durchzuführen. Wenn die Bestätigungsnachricht erscheint, klicken Sie auf Ja.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTW.fm 7/27/07 Rev. C A5 Size Hinweis: Wenn Sie den Druckertreiber löschen, erscheint folgende Nachricht. In der Datei mit Ihren persönlichen Einstellungen werden Ihre Einstellungen gespeichert. Wenn Sie diese Datei nicht löschen, können Sie diese registrierten Einstellungen verwenden, wenn Sie den Druckertreiber erneut installieren.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTX.fm 7/27/07 Rev. C A5 Size Kapitel 2 Verwendung der Druckersoftware (Mac OS X) Anleitung Druckersoftware Die CD-ROM mit der Druckersoftware enthält die folgenden Software. Weitere Informationen zu jeder Software finden Sie in dem Installationshandbuch zur Installation der Software und die Online-Hilfe.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTX.fm 7/27/07 Rev. C A5 Size ❏ Legt die Druckeinstellungen fest wie Medientyp und Papiergröße. Sie haben die Möglichkeit, die Benutzereinstellungen zu registrieren, sowie die registrierten Einstellungen zu importieren oder exportieren. EPSON Printer Utility2 Sie können die Wartungsfunktionen ausführen, zum Beispiel Düsentest und Druckkopfreinigung.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTX.fm 7/27/07 Rev. C A5 Size EPSON StatusMonitor Dieses Utility liefert Informationen zum Druckerstatus wie z. B. Füllstand der Tintenpatrone und die freie Kapazität des Wartungstanks und prüft auf Druckerfehler.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTX.fm 7/27/07 Rev. C A5 Size EPSON LFP Remote Panel EPSON LFP Remote Panel bietet dem Benutzer eine Reihe von Möglichkeiten, den Drucker zu einzustellen und somit eine bessere Druckqualität bei den unterschiedlichen Druckmedien zu erreichen. Druckertreiber aufrufen Um auf den Druckertreiber zuzugreifen, führen Sie die nachstehenden Schritte aus. Folgende Prozeduren können sich je nach Anwendung unterscheiden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Dialogfeld Seite einrichten öffnen Um auf das Dialogfeld Seite einrichten zuzugreifen, klicken Sie auf Seite einrichten im Menü Datei der Anwendung. Das Dialogfeld Seite einrichten wird angezeigt. Sie können in den Einstellungen für die Papiergröße eine Druckgröße, Randlosdruck, Papierquelle und den Druckbereich auswählen..
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Dialogfeld Drucken öffnen Um auf das Dialogfeld Drucken zuzugreifen, klicken Sie auf Drucken im Menü Datei der Anwendung. Es wird das Dialogfeld für den Drucker angezeigt. Nehmen Sie die notwendigen Einstellungen vor und starten Sie den Druckvorgang.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Benutzung der Online-Hilfe Um auf die Online-Hilfe zuzugreifen, klicken Sie im Dialogfeld des Druckertreibers auf die Taste .
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTX.fm 7/27/07 Rev. C A5 Size Grundeinstellungen Dieser Abschnitt zeigt Ihnen, wie Sie Ihre Daten mit dem Epson Druckertreiber aus einer Anwendung heraus drucken können. Druckertreiber einstellen Erstellen Sie zunächst die Daten, die Sie über die Anwendungssoftware drucken möchten. Öffnen Sie vor dem Drucken das Fenster für den Druckertreiber und bestätigen Sie die Druckeinstellungen wie Medientyp und Papiergröße.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Druckerstatus überprüfen 1. Klicken Sie im Dock auf das Druckersymbol. 2. Sie können die Druckerwarteschlange und die entsprechenden Informationen sehen oder den Druck abbrechen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTX.fm 7/27/07 Rev. C A5 Size Drucken abbrechen Sie können vom Computer aus einen Druckauftrag in der Warteposition abbrechen. Wenn der Druck bereits abgeschickt wurde, können Sie den Druck über den Drucker abbrechen. Druck über Drucker abbrechen Halten Sie die Taste Pause 3 Sekunden lang gedrückt, um den Drucker neu zu starten. Der Drucker startet auch dann neu, wenn er gerade einen Druckauftrag ausführt.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Druck über Computer abbrechen 1. Klicken Sie im Dock auf das Druckersymbol. 2. Klicken Sie auf den Druckauftrag, den Sie löschen möchten und anschließend auf Löschen. Hinweis: ❏ Sie können einen Druckauftrag in der Warteschlange mit der oben genannten Prozedur löschen. ❏ Sie können einen bereits an den Drucker abgesendeten Druckauftrag nicht mehr löschen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Auftretendes Problem während des Druckens Wenn während des Druckens ein Fehler auftritt, erscheint eine Fehlermeldung. Wenn Sie sich nicht sicher sind, wie Sie einen Fehler beheben sollen, brechen Sie den Druck ab und starten Sie EPSON StatusMonitor, das Sie Schritt für Schritt durch die Fehlerbehebung führt.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTX.fm 7/27/07 Rev. C A5 Size Druckerhilfsprogramme verwenden Mit den Epson-Drucker-Utilitys können Sie den aktuellen Druckerstatus prüfen und Wartungsvorgänge vom Computer aus vornehmen. EPSON StatusMonitor Dieses Utility liefert Informationen zum Druckerstatus wie z. B. Füllstand der Tintenpatrone und die freie Kapazität des Wartungstanks und prüft auf Druckerfehler.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas SOFTX.fm 7/27/07 Rev. C A5 Size Druckkopfreinigung Dieses Hilfsprogramm reinigt die Druckköpfe für Farben und Schwarz. Eine Druckkopfreinigung ist notwendig, wenn Sie feststellen, dass sich die Druckqualität verschlechtert hat. Druckkopf-Justage Dieses Utility dient zur Verbesserung der Druckqualität der Druckdaten.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Verwendung des EPSON StatusMonitors Der EPSON StatusMonitor versorgt Sie mit Druckerinformationen, einer grafischen Anzeige der Tintenstände, der Kapazität des Wartungstanks und der Statusanzeige. Hinweis: Die Fehlermeldung für den Drucker erscheint automatisch auf Ihrem Bildschirm, auch wenn der EPSON StatusMonitor nicht geöffnet ist.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Informationen im EPSON StatusMonitor ansehen Der EPSON StatusMonitor versorgt Sie mit Druckerinformationen, einer grafischen Anzeige der Tintenstände, der Kapazität des Wartungstanks und der Statusanzeige. Wenn während des Druckens ein Fehler auftritt, erscheint eine Fehlermeldung. Lesen Sie die Meldung und beheben Sie das Problem entsprechend.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Druckersoftware deinstallieren Führen Sie zum Deinstallieren der Druckersoftware die nachstehenden Schritte aus. Druckertreiber deinstallieren Führen Sie zum Deinstallieren des Druckertreibers und EPSON Printer Utility2 die nachstehenden Schritte aus. 1. Schalten Sie den Drucker aus und ziehen Sie das Drucker-Anschlusskabel aus dem Computer und dem Drucker. 2.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size 4. Doppelklicken Sie auf den Ordner Anwendungen und anschließend mit einem Doppelklick auf den Ordner Utilities. 5. Doppelklicken Sie auf das Symbol Print Center (Mac OS X 10.2.x) oder Printer Setup Utility (Mac OS X 10.3 oder höher).
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 6. R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Wählen Sie den Drucker aus und klicken Sie auf Löschen. Nachdem Sie auf Löschen geklickt haben, schließen Sie das Dialogfeld. 7. Legen Sie die Druckersoftware CD-ROM in das CD-ROM Laufwerk ein. 8. Doppelklicken Sie auf den Ordner Druckertreiber. Hinweis: Wenn der Ordner sich nicht öffnet, doppelklicken Sie auf das EPSON Symbol auf dem Desktop.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 9. R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size Doppelklicken Sie auf das EPSON_IJ_Printer Symbol. 10. Wenn das Dialogfeld Authentifizierung angezeigt wird, geben Sie das Kennwort ein und klicken Sie dann auf OK. Um den Druckertreiber zu deinstallieren, müssen Sie sich als Benutzer mit Administratorrechten anmelden. 11. Klicken Sie auf Weiter und anschließend auf Annehmen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk SOFTX.fm 7/27/07 Rev. C A5 Size 12. Wählen Sie Deinstallieren aus dem Pull-Down-Menü und klicken Sie anschließend auf die Taste Deinstallieren. 13. Führen Sie die angezeigten Anweisungen aus, um den Druckertreiber zu deinstallieren. Deinstallieren des EPSON LFP Remote Panels Ziehen Sie den Ordner EPSON LFP Remote Panel in den Papierkorb. Einzelheiten finden Sie in der Online-Hilfe von EPSON LFP Remote Panel.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Kapitel 3 Verschiedenartige Ausdrucke Verwendung des Drucker-Farbmanagements Der Druckertreiber bietet eine Einstellung für Farbmanagement der Druckdaten und eine Farbeinstellung, die besser aussehende Ausdrucke erzeugt, wofür nur der Druckertreiber verwendet wird. Die Farbeinstellung erfolgt ohne Änderung der Originaldaten.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Farbmanagement Info zum Farbmanagementsystem (CMS) Da Geräte wie Digitalkameras, Scanner, Monitore und Drucker Farben unterschiedlich erzeugen, unterscheiden sich die Druckergebnisse vom angezeigten Bild. Verwenden Sie zur Einstellung der Farben verschiedener Geräte das Farbmanagementsystem. Sowohl Windows als auch Mac OS X haben ein Farbmanagementsystem als Standardfunktion.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Rev. C Print.fm 7/27/07 A5 Size Hinweis: Wenn Sie ein Bild drucken, das von einer Digitalkamera oder einem Scanner stammt, unterscheidet sich das Druckergebnis gewöhnlich von der Bildschirmanzeige. Diese Unterschiede entstehen, weil Geräte wie Digitalkameras, Scanner, Monitore und Drucker Farben nach verschiedenen Verfahren erzeugen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Rev. C Print.fm 7/27/07 Anwendung Druckertreiber Bestimmen Sie das Eingabeprofil. Bestimmen Sie das Druckerprofil. A5 Size Drucker Farbmanagement durch Host-ICM/ColorS ync Bevor Sie mit dem Drucken beginnen, müssen Sie die Farben über den Druckertreiber abstimmen. Die verwendete Anwendung muss ICM- oder ColorSync-Farbmanagement unterstützen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Farbmanagement durch Treiber-ICM (nur Windows) Die folgenden Verfahren sind für Adobe Photoshop CS2 unter Windows XP vorgesehen. Wird diese Funktion in Verbindung mit einer Anwendung verwendet, die keine Farbmanagementfunktion unterstützt, müssen Sie das Farbmanagement aus Schritt 4 durchführen. 1. Wählen Sie Drucken mit Vorschau im Menü Datei aus.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 2. Wählen Sie Farbmanagement aus und wählen Sie Dokument für den Ausdruck aus. Wählen Sie Kein Farbmanagement für Farbhandhabung aus. Klicken Sie dann auf Fertig. 3. Öffnen Sie das Fenster für den Druckertreiber. Siehe “Aus einer Windows-Anwendung” auf Seite 18.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 4. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Wählen Sie Manuell für den Modus im Hauptmenü, anschließend ICM und klicken Sie auf Erweitert.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 5. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Wählen Sie das ICM-Dialogfeld Treiber-ICM (Standard) oder Treiber-ICM (Erweitert) für den ICM-Modus aus. Wenn Sie Treiber ICM (Erweitert) auswählen, können Sie die Profile und den Inhalt für die Bilder, Grafiken und Textdaten individuell bestimmen. 6. Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 1. Wählen Sie Drucken mit Vorschau im Menü Datei aus. 2. Wählen Sie Farbmanagement aus und wählen Sie Dokument für den Ausdruck aus. Wählen Sie Farbbestimmung über Drucker für die Farbhandhabung. Klicken Sie dann auf Fertig.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Öffnen Sie das Fenster für den Druckertreiber (Windows) oder das Druckerdialogfeld (Mac OS X). Für Windows siehe “Aus einer Windows-Anwendung” auf Seite 18. Für Mac OS X siehe “Druckertreiber aufrufen” auf Seite 44. 4. Wählen Sie für Windows Manuell für den Modus im Hauptmenü, anschließend ICM und klicken Sie auf Erweitert. Wählen Sie für Mac OS X Drucker Farbmanagement.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 5. Wählen Sie ICM (Windows) bzw. ColorSync (Mac OS X) für das Drucker-Farbmanagement aus. 6. Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Farbmanagement durch Anwendung Die folgenden Verfahren sind für Adobe Photoshop CS2 unter Windows XP vorgesehen. Informationen zu den Einstellungen finden Sie im Benutzerhandbuch der Anwendung. 1. Wählen Sie Drucken mit Vorschau im Menü Datei aus.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 2. Wählen Sie Farbmanagement aus und wählen Sie Dokument für den Ausdruck aus. Wählen Sie Farbbestimmung über Photoshop für die Farbhandhabung. Wählen Sie das Druckerprofil und die Farbzuordnung aus. Klicken Sie dann auf Fertig. 3. Öffnen Sie das Fenster für den Druckertreiber (Windows) oder das Druckerdialogfeld (Mac OS X). Für Windows siehe “Aus einer Windows-Anwendung” auf Seite 18.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 4. Wählen Sie für Windows Manuell für den Modus im Hauptmenü, anschließend Keine Farbanpassung. Für Mac OS X wählen Sie im Dialogfeld zur Drucker-Farbanpassung AUS (Keine Farbanpassung). 5. Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Farbeinstellung durch Druckertreiber Sie können das Farbmanagement nur über den Druckertreiber vornehmen. Ebenso können Sie die PhotoEnhance-Funktion verwenden, um die Farbe der Bilddaten automatisch anzupassen. Farbeinstellung durch die Farbsteuerelemente Sie können das Farbmanagement über den Druckertreiber vornehmen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 1. Print.fm 7/27/07 Rev. C A5 Size Öffnen Sie das Fenster für den Druckertreiber (Windows) oder das Druckerdialogfeld (Mac OS X). Für Windows siehe “Druckertreiber aufrufen” auf Seite 18. Für Mac OS X siehe “Druckertreiber aufrufen” auf Seite 44. 2. Wählen Sie für Windows Manuell für den Modus im Hauptmenü, anschließend Farbsteuerelemente und klicken Sie auf Erweitert.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Mac OS X 3. Nehmen Sie die notwendigen Einstellungen vor. Weitere Informationen zum Druckertreiber finden Sie in der Online-Hilfe.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Mac OS X Hinweis: Windows-Benutzer können die Farbeinstellung durch Überprüfung des Musterbilds auf der linken Seite des Fensters vornehmen. Für die Feinfarbeinstellung können Sie auch den Farbkreis verwenden. 4. Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Automatische Farbeinstellung über PhotoEnhance (Nur Windows) Diese Einstellung stellt verschiedene Bildkorrektureinstellungen zur Verfügung, die Sie vor dem Ausdrucken auf Fotos anwenden können. PhotoEnhance hat keinen Einfluss auf die Originaldaten Ihrer Bilder. 1. Öffnen Sie das Fenster für den Druckertreiber. Siehe “Druckertreiber aufrufen” auf Seite 18. 2.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Im Dialogfeld von Photo Enhance stellen Sie die Effekte ein. Weitere Informationen zum Druckertreiber finden Sie in der Online-Hilfe. 4. Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Schwarz-Weiß-Fotodruck Der erweiterte Schwarz-Weiß-Fotodruck steht Ihnen zur Verfügung, indem Sie die Einstellungen in dem Dialogfeld für die Farbsteuerelemente vornehmen, ohne die Anwendungssoftware zu benutzen. Das Druckbild wird angepasst, ohne die Originaldaten zu verändern. Sie müssen für den Druck von Schwarz-Weiß-Fotos das passende Medium verwenden.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. Print.fm 7/27/07 Rev. C A5 Size Klicken Sie für Windows auf Manuell für den Modus im Hauptmenü, anschließend Farbsteuerelemente und klicken Sie auf Erweitert. Wählen Sie für Mac OS X Drucker Farbmanagement.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 4. Print.fm 7/27/07 Rev. C A5 Size Nehmen Sie die notwendigen Einstellungen vor und starten Sie den Druckvorgang. Weitere Informationen zum Druckertreiber finden Sie in der Online-Hilfe.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Randlos drucken Sie können Daten ohne Rand auf das Papier drucken. Es gibt zwei Arten von Randlosdruck. Hinweis: Wenn Sie Rollenpapier verwenden, können alle vier Seiten randlos sein. Wenn Sie ein Einzelblatt verwenden, können nur die linke und rechte Seite randlos sein. ❏ Automatisch erweitern Vergrößern Sie den Ausdrucks automatisch und drucken Sie ohne Rand.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size ❏ Größe erhalten Wenn Sie eine Anwendung verwenden, vergrößern Sie Ihr Bild über die Papierhöhe und -breite hinaus, um an den vier Rändern unbedruckte Bereiche zu vermeiden. Der Druckertreiber vergrößert die Bilddaten nicht. Es wird empfohlen, dass Sie die Bilddaten in der Anwendung, in der Sie sie erstellt haben, um 3mm nach links und rechts (insgesamt 6 mm) vergrößern.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Unterstützter Medientyp Folgende Mediengrößen werden für den randlosen Druck unterstützt.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size ❏ Die Tinte könnte die Walze des Druckers verschmutzen. In diesem Fall wischen Sie die Tinte mit einem Tuch ab. ❏ Der Druckvorgang mit dieser Funktion dauert länger als der normale Druckvorgang.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Einstellungen der Anwendung Stellen Sie die Größe der Bilddaten über das Dialogfeld für die Bildeinstellung in der Anwendungssoftware ein. Automatisch Erweitern ❏ Verwenden Sie dieselbe Papiergröße wie für das Drucken. ❏ Wenn Ihre Anwendung Randeinstellungen hat, setzen Sie den Rand auf 0 mm. ❏ Setzen Sie die Bilddaten auf die Papiergröße.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Druckertreiber-Einstellungen Gehen Sie zum Drucken der Daten mit dieser Funktion wie folgt vor. Windows 1. Öffnen Sie das Fenster für den Druckertreiber. Siehe “Druckertreiber aufrufen” auf Seite 18. 2. Wählen Sie im Hauptmenü den Medientyp, die Papierquelle, die Seitengrößer oder Papiergröße. 3.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 4. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Wählen Sie Randlos und klicken Sie auf Erweitern.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 5. Print.fm 7/27/07 Rev. C A5 Size Wählen Sie Automatisch erweitern oder Größer erhalten. Wenn Sie Automatisch erweitern auswählen, setzen Sie den Wert auf Vergrößerung. Max 3 mm links und 5 mm rechts (das Bild verschiebt sich um 1 mm nach rechts) Standard 3 mm links und rechts Min 1,5 mm links und rechts Hinweis: Durch Bewegen des Schiebereglers in Richtung Min wird der Betrag der Bildvergrößerung verringert.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Mac OS X 1. Dialogfeld Seite einrichten öffnen Siehe “Druckertreiber aufrufen” auf Seite 44. 2. Wählen Sie die Papiergröße und randlos Drucken wie Automatisch erweitern oder Größe erhalten und klicken Sie anschließend auf OK. 3. Dialogfeld Drucken öffnen Siehe “Druckertreiber aufrufen” auf Seite 44.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 4. Print.fm 7/27/07 Rev. C A5 Size Wenn Automatisch erweitern ausgewählt wurde, setzen Sie den Wert für die Erweiterung. Max 3 mm links und 5 mm rechts (das Bild verschiebt sich um 1 mm nach rechts) Standard 3 mm links und rechts Min 1,5 mm links und rechts Hinweis: Durch Bewegen des Schiebereglers in Richtung Min wird der Betrag der Bildvergrößerung verringert.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 5. Wählen Sie im Dialogfeld für die Druckeinstellung den Medientyp aus. 6. Wenn Sie auf Rollenpapier drucken, wählen Sie im Dialogfeld für Rollenpapier-Optionen die Funktion Automatisch abschneiden. Siehe “Rollenpapier bei randlosem Druck abschneiden” auf Seite 97. 7. Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Rollenpapier bei randlosem Druck abschneiden Wenn Sie für den randlosen Druck Rollenpapier verwenden, unterscheidet sich die Funktion Papier abschneiden je nach den Einstellungen des Druckertreibers für Randlos und Automatisch abschneiden.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Erläuterung Print.fm 7/27/07 Als Standardeinstellung ist der Normalschnitt eingestellt. Der obere Bereich kann verschmieren, weil der obere Bereich des Rollenpapiers abschnitten wird, während der Druckvorgang gestoppt wird. Wenn die Schneideposition leicht verändert wird, wird das Bild auf der nächsten Seite im oberen oder unteren Bereich gedruckt; allerdings ist die Druckzeit kürzer.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Druckbereich Vergrößern oder Verkleinern Sie können die Größe der Daten an die zu bedruckende Papiergröße anpassen. Es gibt drei Möglichkeiten, den Druckbereich zu vergrößern oder zu verkleinern. ❏ An Seite anpassen (Nur Windows) Vergrößert bzw. verkleinert die Daten proportional auf die Papiergröße, die Sie in der Liste Ausgabepapierformat ausgewählt haben.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size ❏ An Rollenpapierbreite anpassen (Nur Windows) Vergrößert bzw. verkleinert die Daten proportional auf die Breite des Rollenpapiers, die Sie in der Liste Ausgabepapierformat ausgewählt haben. ❏ Benutzerdefiniert Erlaubt Ihnen die Einstellung der Verkleinerung oder Vergrößerung der Daten in Prozent.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size An Seite anpassen (Nur Windows) Sie können die Größe der Daten an die zu bedruckende Papiergröße anpassen. 1. Öffnen Sie das Fenster für den Druckertreiber. Siehe “Druckertreiber aufrufen” auf Seite 18. 2. Klicken Sie auf die Registerkarte Seitenlayout und wählen sie dieselbe Papiergröße, wie für die Papiergröße der Daten.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Wählen Sie aus der Papierausgabeliste die Papiergröße, die Sie im Drucker eingelegt haben. Vergrößert bzw. verkleinert die Daten proportional auf die Papiergröße, die Sie in der Liste Ausgabepapierformat ausgewählt haben. 4. Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size An Rollenpapierbreite anpassen (Nur Windows) 1. Öffnen Sie das Fenster für den Druckertreiber. Siehe “Druckertreiber aufrufen” auf Seite 18. 2. Klicken Sie auf die Registerkarte Seitenlayout und wählen sie dieselbe Papiergröße, wie für die Papiergröße der Daten.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Wählen Sie Verkleinern/Vergrößern und klicken Sie anschließend auf An Rollenpapierbreite anpassen. Vergrößert bzw. verkleinert die Daten proportional auf die Papiergröße, die Sie in der Liste Rollenbreite ausgewählt haben.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 4. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Wählen Sie aus der Rollenbreitenliste die Papierbreite, die Sie im Drucker eingelegt haben. Vergrößert bzw. verkleinert die Daten proportional auf die Papiergröße, die Sie in der Liste Rollenbreite ausgewählt haben. 5. Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Benutzerdefiniert Erlaubt Ihnen die Einstellung der Verkleinerung oder Vergrößerung in Prozent. Windows 1. Öffnen Sie das Fenster für den Druckertreiber. Siehe “Druckertreiber aufrufen” auf Seite 18. 2. Klicken Sie auf die Registerkarte Seitenlayout und wählen sie dieselbe Papiergröße, wie für die Papiergröße der Daten. 3.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Mac OS X 1. Dialogfeld Seite einrichten öffnen Siehe “Druckertreiber aufrufen” auf Seite 44. 2. Wählen Sie den Drucker und die Papiergröße aus. Wählen Sie die Papiergröße aus, die im Drucker eingelegt ist. 3. Setzen Sie die Skalierung zwischen 25 und 400%. 4. Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Mehrere Seiten auf einem Blatt drucken Sie können auf einem Blatt Papier zwei oder vier Dokumentseiten ausdrucken. Wenn sie fortlaufend Ihre Daten auf einem Layout von A4-Größe drucken, wird der Ausdruck wie unten gezeigt erscheinen. Hinweis: ❏ Windows-Benutzer sollten die Funktionen des Druckertreibers für das Layout-Drucken verwenden.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Windows 1. Öffnen Sie das Fenster für den Druckertreiber. Siehe “Druckertreiber aufrufen” auf Seite 18. 2. Klicken Sie auf die Registerkarte Seitenlayout, wählen Sie die das Kontrollkästchen Mehrseitig, wählen Sie N-up und klicken Sie anschließend auf Einstellungen. 3. In dem Dialogfeld Druck-Layout können Sie die Reihenfolge festlegen, in der die Seiten gedruckt werden.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Mac OS X 1. Dialogfeld Drucken öffnen Siehe “Druckertreiber aufrufen” auf Seite 44. 2. Wählen Sie einen Zieldrucker aus und anschließend aus der Liste zur Auftragsbestimmung, in der die Seiten gedruckt werden, Layout. Hinweis: Wenn Sie für den Rand eine andere Einstellung als Kein wählen, werden auf jedem Blatt die Seitenränder gedruckt. 3.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Posterdruck Mi der Posterdruckfunktion können Sie auch Bilder in Postergröße drucken, indem Sie die Seite so vergrößern, dass Sie auf mehreren Einzelblättern gedruckt wird. Dies ist ausschließlich eine Windows-Funktion. Sie können ein Poster oder einen Kalender erstellen, indem Sie verschiedene, bedruckte Papierseiten miteinander verbinden. Der Posterdruck unterstützt folgende zwei Arten..
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size ❏ Posterdruck mit Rändern Sie können ein Bild auf Postergröße ausdrucken, indem Sie es automatisch auf mehrere Seiten vergrößern. Sie müssen die Ränder dann abschneiden und die verschiedenen Papierblätter zu einem Poster verbinden. 1. Öffnen Sie das Fenster für den Druckertreiber. Siehe “Druckertreiber aufrufen” auf Seite 18.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 2. Klicken Sie auf die Registerkarte Seitenlayout, wählen Sie die das Kontrollkästchen Mehrseitig, wählen Sie Poster und klicken Sie anschließend auf Einstellungen. 3. Im Dialogfeld für Postereinstellungen wählen Sie die Anzahl von Druckseiten, die Sie für Ihr Poster benötigen. Hinweis: Je größer Ihr Bereich ist, desto größer wird Ihr Poster.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 4. Wenn Sie ein randloses Poster drucken möchten, wählen Sie das Kontrollkästchen randloser Posterdruck und wählen Sie die Bereiche, die Sie nicht drucken möchten durch Klicken auf OK. Anschließend fahren Sie mit Schritt 6 fort. 5.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 6. Print.fm 7/27/07 Rev. C A5 Size Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang. Die Blätter entlang der Führungslinien verbinden Die Schritte für die Verbindung der Blätter hängen davon ab, ob ein randloser Druck oder ein Druck mit Rand vorliegt. Randloser Posterdruck Dieser Abschnitt erläutert, wie die vier gedruckten Seiten miteinander verbunden werden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Posterdruck mit Rändern Wenn Sie Überlappende Ausrichtungsmarken auswählen, werden auf dem Papier folgende Markierungen gedruckt. Sehen Sie sich die unten aufgeführten Verfahren an, um die vier Seiten zu verbinden, indem Sie die Markierungsmarken benutzen. Die vier Seiten werden nach folgender Anordnung verbunden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 1. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Schneiden Sie die obere, linke Seite entlang der Markierung ab (vertikale, blaue Linie). Die Markierung ist bei Schwarz-Weiß-Druck schwarz. 2. Legen Sie das obere linke Blatt auf das obere rechte Blatt. Die X-Marke muss mit der unteren Abbildung übereinstimmen und das obere, linke Blatt muss mit dem oberen, rechten Blatt durch Zellophanband vorübergehend verbunden werden. 3.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 4. Verbinden Sie die linken und rechte Blätter auf der Rückseite mit einem Zellophanband. 5. Verfahren Sie mit den unteren Blättern, wie in Schritten 1-4 gezeigt.. 6. Schneiden Sie die Unterseiten der oberen Blätter entlang der Markierung ab (horizontale, blaue Linie). Die Markierung ist bei Schwarz-Weiß-Druck schwarz.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 7. Legen Sie die oberen Blätter auf die unteren Blätter. Die X-Marke muss mit der unteren Abbildung übereinstimmen und die oberen Blätter müssen mit den unteren Blättern durch Zellophanband vorübergehend verbunden werden. 8. Schneiden Sie die Seiten entlang der Markierung ab (horizontale, rote Linie). Die Markierung ist bei Schwarz-Weiß-Druck schwarz.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 9. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Verbinden Sie die unteren und oberen Blätter auf der Rückseite mit einem Zellophanband. 10. Nachdem Sie alle Blätter miteinander verbunden haben, schneiden Sie die Ränder entlang der äußeren Markierungen ab.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Drucken auf benutzerdefiniertem Papier Sie können auch auf einem eigenen Papierformat drucken. Führen Sie dazu die nachstehenden Anweisungen aus. Die Größen, die Sie registrieren können, sind Folgende.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Windows 1. Öffnen Sie das Fenster für den Druckertreiber. Siehe “Druckertreiber aufrufen” auf Seite 18. 2. Klicken Sie im Hauptmenü auf Benutzerdefiniert. Hinweis: Sie können nicht Benutzerdefiniert auswählen, wenn in den Papiereinstellungen Randlos eingestellt ist.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Stellen Sie Ihre benutzerdefinierte Papiergröße ein und klicken Sie auf Speichern. ❏ Sie können für den Namen der Papiergröße bis zu 24 Zeichen eingeben. ❏ Sie können die Größe leicht ändern, indem Sie die Papiergröße einer ähnlichen Papiergröße aus den Standardpapiergrößen eingeben.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Mac OS X 1. Dialogfeld Seite einrichten öffnen Siehe “Druckertreiber aufrufen” auf Seite 44. 2. Wählen Sie in der Papiergröße Benutzerdefinierte Seiten verwalten. 3. Klicken sie auf + und geben Sie den Papiernamen ein. 4. Geben sie die Papierbreite, Papierhöhe und die Ränder ein und klicken Sie auf OK.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Die Druckergröße und Druckränder können Sie folgendermaßen einstellen. Drucker Beschreibung Standard Der Druck erfolgt auf Einzelblattpapier mit einem unteren Rand von 14 mm und einem oberen, linken und rechten Rand von 3 mm. Maximum Der Druck erfolgt auf Einzelpapier mit vier Rändern von 3 mm in alle 4 Richtungen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Hinweis: ❏ Um Ihre registrierten Eingaben zu ändern, klicken Sie in der Liste auf den Namen der Papiergröße. ❏ Um die registrierte Papiergröße zu kopieren, klicken Sie auf den Namen der Papiergröße aus der Liste und anschließend auf Kopieren. ❏ Um die registrierte Papiergröße zu löschen, klicken Sie auf den Namen der Papiergröße aus der Liste und anschließend auf -.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Flaggendruck auf Rollenpapier In diesem Abschnitt wird beschrieben, wie Banner und Panoramabilder gedruckt werden. Zum Drucken eines Banners gibt es zwei Möglichkeiten. Papierzufuhr Anwendung Rollenpapier Tool zum Erstellen von Dokumenten, Bild- und Bearbeitungssoftware Rollenpapier (Banner) Software, die Bannerdruck unterstützt Folgende Druckgrößen stehen zur Verfügung.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Einstellungen der Anwendung Sie müssen die Daten zum Drucken eines Banners mit einer Anwendung erstellen. Wenn die Papiergröße, die Sie drucken möchten, gleich oder kleiner als die maximal in der Anwendung einstellbare Größe ist, wählen Sie die gewünschte Papiergröße aus. Druckertreiber-Einstellungen Windows 1. Öffnen Sie das Fenster für den Druckertreiber.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Wählen Sie Rollenpapier oder Rollenpapier (Banner) aus der Liste Papierzufuhr aus. Hinweis: Rollenpapier (Banner) ist für Anwendungen verfügbar, die Bannerdruck unterstützen. 4. Klicken Sie auf Rollenpapier-Option und anschließend wählen Sie Normalschnitt oder Aus in der Liste für Automatisches Schneiden aus.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 5. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Klicke Sie auf die Registerkarte Seitenlayout und wählen Sie Verringern/Vergrößern. Anschließend wählen Sie An Seite anpassen oder An Rollenpapierbreite anpassen aus. Hinweis: Wenn Sie eine Anwendung verwenden, die Bannerdruck unterstützt, ist es nicht erforderlich, Vergrößern/Verkleinern auszuwählen, wenn Rollenpapier (Banner) als Papierzufuhr ausgewählt ist.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 6. Print.fm 7/27/07 Rev. C A5 Size Wählen Sie die Dokumentengröße aus, indem Sie die Liste Papiergröße aus der Anwendung verwenden und wählen Sie die Rollenpapierbreite, die im Drucker eingelegt wurde. Sie können die Papiergröße über Benutzerdefiniert individuell einstellen. Papierbreite 89 bis 432 mm Papierhöhe 127 bis 15.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 7. Wählen Sie die Papiergröße aus der Liste Ausgabepapiergröße aus und vergewissern Sie sich, dass das Kontrollkästchen Vergrößerung optimieren aktiviert ist. 8. Wählen Sie weitere Einstellungen und starten Sie den Druckvorgang.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Mac OS X 1. Dialogfeld Seite einrichten öffnen Siehe “Druckertreiber aufrufen” auf Seite 44. 2. Vergewissern Sie sich, dass Ihr Drucker ausgewählt ist, und wählen Sie das mit der Anwendung erstellte Dokument aus. Sie können die Papiergröße auch benutzerdefiniert einstellen, indem Sie Benutzerdefinierte Papiergröße verwalten auswählen. Papierbreite 89 bis 432 mm Papierhöhe 127 bis 15.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Drucken mit Medien, die nicht von Epson stammen Wenn Sie Spezialmedien verwenden, die nicht von Epson stammen, müssen Sie vor dem Drucken die notwendigen Einstellungen für den Papiertyp vornehmen. Zum Drucken und Einstellen gibt es zwei Möglichkeiten..
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Benutzerdefinierte Elemente im Druckertreiber Sie können im Display die Elemente wunschgemäß einstellen oder verändern.. Sie können die Einstellungen auch in eine Datei exportieren und dieselben Druckertreibereinstellungen verschiedenen Computern zur Verfügung stellen. Speichern der Druckertreibereinstellungen Sie können bis zu 100 Einstellungen speichern.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Geben Sie in dem Namenskästchen den Namen ein und klicken Sie auf Speichern. Sie können Ihre registrierte Eingabe aus der Liste mit den Einstellungen auswählen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Benutzerdefiniertes Medium speichern Sie können die Elemente der Mediumeinstellung im Hauptmenü speichern. 1. Ändern Sie die Elemente der Mediumeinstellungen im Hauptmenü.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 2. Klicken Sie auf Benutzerdefinierte Einstellungen. 3. Geben Sie in dem Namenskästchen den Namen ein und klicken Sie auf Speichern. Sie können Ihre registrierte Eingabe aus der Liste mit den Medientypen auswählen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Menüeinstellung Sie können die Symbole für die Einstellungen Auswahl, Medientyp und Papiergröße neu anordnen. 1. Klicken Sie auf die Registerkarte Utility und anschließend auf Menüeinstellung.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size 2. Wählen Sie das Bearbeitungselement aus. 3. Ordnen Sie die Symbole nach Ihren Wünschen in der Liste an oder bilden Sie Gruppen für die Symbole. ❏ Sie können die Listenelemente durch das Drag-and-Drop-Verfahren verwalten. ❏ Um eine neue Gruppe hinzuzufügen, klicken Sie auf Gruppe hinzufügen. ❏ Um eine Gruppe zu löschen, klicken Sie auf Gruppe löschen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size ❏ Verschieben Sie die nicht benutzten Elemente in die Gruppe Nicht anzeigen. Hinweis: Die Standardelemente können nicht gelöscht werden. 4. Klicken Sie auf Speichern.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Export oder Import Sie können die Einstellungen, die Sie als Datei registriert haben, exportieren oder importieren. Einstellungen exportieren 1. Öffnen Sie das Dialogfeld für Speichern oder Löschen bzw. das benutzerdefinierte Dialogfeld für das Speichern oder Löschen von Medien. 2. Wählen Sie die Einstellung aus der Liste und klicken Sie auf Export. 3.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Print.fm 7/27/07 Rev. C A5 Size Einstellungen importieren 1. Öffnen Sie das Dialogfeld für Speichern oder Löschen bzw. das benutzerdefinierte Dialogfeld für das Speichern oder Löschen von Medien. 2. Klicken Sie auf Import. 3. Wählen Sie die Datei aus, die Sie importieren möchten und anschließend auf Öffnen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Print.fm 7/27/07 Rev. C A5 Size Alle Einstellungen exportieren oder importieren Sie können sämtliche Einstellungen für den Druckertreiber als eine Datei exportieren oder importieren. 1. Klicken Sie auf die Registerkarte Utility und anschließend auf Export oder Import. 2. Klicken Sie auf Export oder Import. 3. Geben Sie vor dem Export der Einstellung den Dateinamen ein und klicken Sie auf Speichern.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size Kapitel 4 Bedienfeld Tasten, Anzeigen und Meldungen Das Bedienfeld des Druckers besteht aus 6 Tasten, 3 Anzeigen und einem LCD-Display mit 32-Zeichen (Flüssigkristallanzeige). 1 2 3 4 5 6 7 8 Menu 3sec. Tasten In diesem Abschnitt werden die Funktionen der Tasten am Bedienfeld beschrieben. Taste Beschreibung 1 Netzschalter Hiermit schalten Sie den Drucker ein und aus.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3 CONTP.fm 7/27/07 Taste Papierzufuhr Rev. C A5 Size Dient zur Wahl einer Papierzufuhr (Rollenpapier Automatisch schneiden Ein /Rollenpapier Automatisch schneiden Aus /Einzelblatt ). Schneidet das Rollenpapier automatisch nach dem Drucken, wenn die Taste 3 Sekunden lang gedrückt wird und Rollenpapier automatisch schneiden ausgewählt ist.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 6 CONTP.fm 7/27/07 Taste Menü Rev. C A5 Size Ruft den Menü-Modus auf. Durch Drücken während des Druckvorgangs wird das Menü DRUCKERSTATUSMENÜ aktiviert. Wählt während des Drückens des Menü-Modus ein gewünschtes Menü in Vorwärtsrichtung aus.. Stellt den ausgewählten Parameter in dem gewünschten Element im Menü-Modus ein. Die Option wird ausgeführt, wenn die aufgerufene Option nur ausführbar ist.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 9 CONTP.fm 7/27/07 Anzeige Papier (rot) Rev. C A5 Size Leuchtet: Im Einzelblatteinzug ist kein Papier eingelegt, während Einzelblatt als Papierzufuhr gewählt ist. Rollenpapier ist zu Ende, wenn Rollenpapier Automatisch schneiden Ein oder Rollenpapier Automatisch schneiden Aus als Papierzufuhr ausgewählt ist.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size Meldungen In diesem Abschnitt werden die Bedeutungen der am LCD-Display angezeigten Meldungen erläutert. Die Meldungen sind entweder Statusmeldungen oder Fehlermeldungen. Nähere Informationen zu den Fehlermeldungen erhalten Sie unter “Ein Fehler ist aufgetreten” auf Seite 254. Meldung Beschreibung BEREIT Der Drucker ist bereit, Daten zu drucken. DRUCKT Der Drucker verarbeitet Daten.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size Menüeinstellungen Wann Sie den Menü-Modus verwenden sollten Im Menü-Modus können Sie die Druckereinstellungen, die Sie normalerweise im Druckertreiber vornehmen, sowie zusätzliche Einstellungen direkt am Bedienfeld vornehmen. Hinweis: ❏ Einige Anwenderprogramme übertragen unter Umständen Befehle zum Drucker, die die Menüeinstellungen ignorieren.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size Menüliste Menü Teil Parameter “DRUCKERKONFIG.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas “TESTDRUCK” auf Seite 164 “DRUCKERSTATUS” auf Seite 165 R41AA177P (A+) all.bk CONTP.fm 7/27/07 “DÜSENTEST” auf Seite 164 Rev. C A5 Size DRUCKEN “STATUSTEST” auf Seite 164 DRUCKEN “JOB INFO” auf Seite 165 DRUCKEN “BENUTZERD PAP” auf Seite 165 DRUCKEN “VERSION” auf Seite 165 Bxxxxx.yyyy.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 “VERBLB.TINTE” auf Seite 165 (EPSON Stylus Pro 4880/4880C) Rev.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas “BENUTZERD PAP” auf Seite 168 “WARTUNG” auf Seite 170 “DRUCKKOPFAUSR. ” auf Seite 171 R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size “PAPIERNUMMER” auf Seite 168 AUTO, 1 - 10 “WALZENABSTAND” auf Seite 168 ENG, AUTO, WEIT, WEITER “STÄRKEMUSTER” auf Seite 169 DRUCKEN “STÄRKENUMMER” auf Seite 169 1 - 16 “SCHNEIDVERFAHREN” auf Seite 169 STANDARD, DÜNNES PAPIER, DICK, SCHNELL, DICK, LANGSAM “PAP.EINZUGKOR” auf Seite 169 -0.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas “NETZWERK SETUP” auf Seite 171 CONTP.fm 7/27/07 Rev. C A5 Size “NETZWERK SETUP” auf Seite 171 DEKATIVIEREN, AKTIVIEREN “IP ADRESSEINSTELLLUNG” auf Seite 171 AUTO, BEDIENFELD “IP, SM, DG EINSTELLUNG” auf Seite 172 IP ADRESSE 000.000.000.000 192.168.192.168 255.255.255.255 TEILNETZMASKE 000.000.000.000 255.255.255.000 255.255.255.255 STANDARD GATEWAY 000.000.000.000 255.255.255.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size Grundlegende Menüeinstellung In diesem Abschnitt wird beschrieben, wie Sie in den Menü-Modus schalten und Einstellungen mit den Tasten am Bedienfeld vornehmen. Hinweis: ❏ Sie können jederzeit durch Drücken der Taste Pause den Menü-Modus verlassen und in den Zustand BEREIT zurückkehren. ❏ Durch Drücken der Taste Papierzufuhr vorherigen Schritt. kehren Sie zurück zum 1.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 7. CONTP.fm 7/27/07 Rev. C A5 Size Stellen Sie den Parameter ein. Drücken Sie die Taste Menü , um den gewählten Parameter zu speichern. Wenn der Parameter nur ausführbar ist, drücken Sie die , um die Funktion der Option auszuführen. Taste Menü Nach der Ausführung verlässt der Drucker den Menümodus und kehr zum BEREIT Status zurück. 8. Verlassen Sie den Menü-Modus. Drücken Sie die Taste Pause .
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size WALZENABSTAND Sie können den Abstand zwischen dem Druckkopf und dem Papier einstellen. Lassen Sie diese Einstellung normalerweise auf STANDARD. Wenn die Ausdrucke verschmiert sind, wählen Sie WEIT oder WEITER aus. Wählen Sie ENG aus, um auf dünnes Papier zu drucken, oder AM WEITESTEN, um auf dickes Papier zu drucken.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size SCHNITTSTELLE Sie können eine Schnittstelle zum Empfang der Druckdaten auswählen. Wenn Sie AUTO auswählen, schaltet der Drucker abhängig von der Schnittstelle, die zuerst Daten empfängt, automatisch zwischen den Schnittstellen um. Wenn Sie USB oder NETZWERK auswählen, kann nur die von Ihnen ausgewählte Schnittstelle die Daten empfangen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size Die nachstehende Tabelle enthält die Standard-Papierränder für das Papier.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size Wenn die gleichen Daten mit einem 3 mm-Rand und einem 15 mm-Rand gedruckt und verglichen werden, stellen Sie unter Umständen fest, dass ein Teil der rechten Seite des 15 mm-Rands nicht gedruckt wurde.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size TIMEOUT Der Einstellbereich beträgt 30 bis 300 Sekunden. Wenn das Kabel des Druckers herausgezogen ist oder der Drucker länger als die eingestellte Zeitdauer „hängen bleibt“, wird der Druckauftrag abgebrochen und der Drucker startet den Papiertransport. SCHNEIDE_DEF Sie können die Position des Papierschnitts einstellen, wenn Sie mit einem oberen und unteren Seitenrand von Null drucken.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size AUTOREINIGUNG Wenn Sie EIN auswählen und einen Düsentest vom Druckertreiber oder Bedienfeld aus durchführen, prüft der Drucker nicht nur auf verstopfte Düsen, sondern führt außerdem automatisch eine Druckkopfreinigung durch. Hinweis: Wählen Sie nicht EIN aus, wenn Sie Spezialmedien verwenden, die nicht von Epson stammen, oder wenn die Papierbreite weniger als 210 mm beträgt, LEIS.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size JOB INFO Sie können Informationen über im Drucker gespeicherte Druckaufträge (bis zu 10) drucken. BENUTZERD PAP Sie können gespeicherte Informationen drucken. DRUCKERSTATUS Dieses Menü enthält die folgenden Menüpunkte. VERSION Sie können die Version der Firmware anzeigen. DRUCKBARE SEITEN Sie können die Anzahl der mit jeder Tintenpatrone druckbaren Seiten anzeigen. VERBLB.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size WARTUNGSTANK Sie können die freie Kapazität des Wartungstanks anzeigen. E ✽✽✽✽✽ F (100-81%) E ✽✽✽✽ F (80-61%) E ✽✽✽ F (60-41%) E ✽✽ F (40-21%) E✽ F (20-11%) nn% (weniger als 10 %) 0% (Wartungstank voll) VERBR.ZÄHLER Sie können den Tintenverbrauch in Millilitern und den Papierverbrauch in Zentimetern anzeigen. Hinweis: Die unter VERBR.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size GESAMTDRUCK Sie können die Gesamtzahl der gedruckten Seiten anzeigen. LEBENSDAUER Sie können die Nutzungsdauer der einzelnen Verbrauchsmaterialien anzeigen. PAPIERSCHNEIDE Sie können die Nutzungsdauer der Schneidvorrichtung anzeigen. Hinweis: Die am LCD-Display angezeigten Werte sind ungefähre Orientierungswerte.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size BENUTZERD PAP Dieses Menü enthält die folgenden Menüpunkte. Informationen zum Vornehmen der Papiereinstellungen finden Sie unter “Papiereinstellungen vornehmen” auf Seite 183. PAPIERNUMMER Wenn Sie STANDARD auswählen, bestimmt der Drucker die Papierstärke automatisch. Sie können auch Nr.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size STÄRKEMUSTER Sie können ein Muster zur Papierstärkebestimmung drucken. Wenn Sie STANDARD unter PAPIERNUMMER wählen, wird das Muster nicht gedruckt. STÄRKENUMMER Wenn Sie Epson-Spezialmedien verwenden, wählen Sie normalerweise AUTO aus.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size TROCKEN IN Sie können die Trockenzeit pro Durchgang des Druckkopfs einstellen. Der Bereich beträgt 0 bis 10 Sekunden. Suction (Papiersaugkraft) Sie können die Saugkraft für den Transport des bedruckten Papiers einstellen. Wählen Sie NORMAL, -1, -2, -3 oder -4. M/W-ADJ Sie können den MicroWeave-Modus einstellen. Der Einstellbereich beträgt NORMAL, 1 und 2.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size DRUCKKOPFAUSR. Dieses Menü enthält die folgenden Menüpunkte. PAPIERSTÄRKE Sie können die Stärke des verwendeten Papiers einstellen. Wenn Sie Epson-Spezialmedien mit einer Papierstärke von 0,2 oder 1,2 mm verwenden, wählen Sie STD aus. Verwenden Sie Spezialmedien, die nicht von Epson stammen, geben Sie die Papierstärke im Bereich von 0,1 bis 1,6 mm ein.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size IP, SM, DG EINSTELLUNG Sie können die IP-Adresse, die Teilmaske und den Standard-Gateway für den Drucker einstellen BONJOUR Sie können die Bonjour-Einstellung des Druckers einstellen. NETZWERK_INIT_EINSTELLUNG Sie können die Netzwerkeinstellungen des Druckers auf Werkseinstellung zurücksetzen. SCHNEIDE_AUST Sie können das Verfahren für den Austausch des Papierschneiders anzeigen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size Druckkopfdüsen überprüfen Sie können ein Düsentestmuster drucken, um herauszufinden, ob die Düsen die Tinte richtig ausgeben. Wenn die Düsen die Tinte nicht richtig ausgeben, fallen im Testmuster fehlende Punkte auf. Führen Sie zum Drucken des Düsentestmusters die nachstehenden Anweisungen aus.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size Beispiele für Düsentestmuster: gut Druckkopfreinigung nötig Wenn Sie fehlende Punkte in den Testlinien des Musters feststellen, ist eine Druckkopfreinigung erforderlich. Halten Sie die Taste Menü länger als 3 Sekunden gedrückt oder starten Sie das Utility Druckkopfreinigung. Für Windows siehe “Druckerhilfsprogramme verwenden” auf Seite 31.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size Druckkopf ausrichten Um eine Beeinträchtigung der Druckqualität durch eine falsche Ausrichtung des Druckkopfs zu vermeiden, korrigieren Sie vor dem Drucken die Ausrichtung des Druckkopfs. Sie können den Druckkopf manuell oder automatisch ausrichten. Führen Sie zunächst die automatische Ausrichtung des Druckkopfs durch.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 9. R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size Drücken Sie die Taste Menü , um AUTO auszuwählen und drücken Sie anschließend die Taste Papierzuführung oder Papierzuführung , um BI-D 2-COLOR auszuwählen. , dann beginnt der Drucker mit 10. Drücken Sie die Taste Menü dem Druckvorgang. Nach dem Drucken wird die Druckkopfausrichtung automatisch gestartet.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Rev. C CONTP.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk Rev. C CONTP.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Rev. C CONTP.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Rev. C CONTP.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size Druckkopf manuell ausrichten Sind Sie mit dem Ergebnis der automatischen Druckkopfausrichtung nicht zufrieden, können Sie die Druckkopfausrichtung manuell durchführen. Führen Sie für die manuelle Druckkopfausrichtung die nachstehenden Anweisungen aus. 1. Drücken Sie die Taste Menü 2.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size Beispiele für Testmuster der Druckkopfausrichtung: EPSON Stylus Pro 4880/4880C: VLm Lc 1 2 1 2 3 4 5 6 7 8 9 3 4 5 6 7 8 9 EPSON Stylus Pro 4450: M C 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10. Nach dem Drucken werden die Musternummer und die aktuell eingestellte Nummer angezeigt.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size Papiereinstellungen vornehmen Sie können eigene Papiereinstellungen für die verschiedenen Medien speichern und abrufen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Rev. C CONTP.fm 7/27/07 A5 Size 6. Drücke Sie die Taste Menü , um WALZENABSTAND anzeigen zu lassen und drücken Sie dann die Taste Papiertransport oder Papiertransport , um NAH, STANDARD, WEIT oder WEITER auszuwählen. 7. , um den ausgewählten Drücken Sie die Taste Menü Walzenabstand zu speichern. Auf dem LCD-Display erscheint STÄRKEMUSTER. 8. Drücken Sie die Taste Menü zu drucken.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size 15. TROCKEN IN erscheint. Drücken Sie auf Papiertransport oder die Taste Papiertransport , um die Zeit in Sekunden einzustellen und drücken anschließend Sie die Taste Menü . 16. Suction (Papiersaugkraft) erscheint. Drücken Sie die Taste Papiertransport oder Papiertransport , um STANDARD, -1, -2, -3oder -4 auszuwählen. 17. M/W-ADJ erscheint.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 6. R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size Drücken Sie die Taste Pause , um den Menü-Modus zu verlassen. Drucken eines Statusblattes Im Menü-Modus können Sie ein Statusblatt mit den aktuellen Standardwerten ausdrucken. Führen Sie zum Drucken eines Statusblatts die folgenden Schritte aus. 1. Vergewissern Sie sich, dass Papier im Drucker vorhanden ist. 2. Drücken Sie die Taste Menü 3.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk CONTP.fm 7/27/07 Rev. C A5 Size Papier-Warnwert auswählen Durch Einstellen des Warnwerts gemäß den folgenden Hinweisen können Sie eine Meldung erhalten, wenn nicht mehr viel Papier vorhanden ist. Hinweis: Diese Einstellung steht Ihnen nur dann zur Verfügung, wenn Sie Rollenpapier oder Blatt schneiden im PAPIERZÄHLER im Wartungsmodus ausgewählt haben. 1. Drücken Sie die Taste Menü 2.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size Wartungsmodus Einstellverfahren für den Wartungsmodus In diesem Abschnitt wird beschrieben, wie Sie in den Wartungsmodus schalten und Einstellungen mit den Tasten am Bedienfeld vornehmen. Gehen Sie wie folgt vor, um die Einstellungen im Wartungsmodus vorzunehmen. Hinweis: Durch Drücken der Taste Papierzufuhr vorherigen Schritt. kehren Sie zurück zum 1. Schalten Sie in den Wartungsmodus.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size Hinweis: Wird ein zweiter Parameter am LCD-Display angezeigt, wiederholen Sie die Schritte 4 und 5, um den zweiten Parameter zu wählen und einzustellen. 6. Verlassen Sie den Wartungsmodus. Drücken Sie den Netzschalter , um den Drucker auszuschalten, und schalten Sie ihn dann wieder ein.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size Details der Optionen des Wartungsmodus HEX-SPEICHERAUSZUG Vom Hostcomputer empfangene Daten können als hexadezimale Zahlen ausgedruckt werden. Führen Sie zum Abbrechen des Druckvorgangs die nachstehenden Schritte aus. 1. Vergewissern Sie sich, dass Papier im Drucker vorhanden ist. 2.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size SPRACHE Sie können die Sprache des LCD-Displays auswählen. Führen Sie zum Auswählen der Sprache die nachstehenden Anweisungen aus. 1. Im Wartungsmodus drücken Sie die Taste Papiertransport oder Papiertransport um SPRACHEanzeigen zu lassen. . Anschließend drücken Sie die Taste Menu 2. Drücken Sie die Taste Papiertransport oder Papiertransport , um eine geeignete Sprache auszuwählen. 3.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas CONTP.fm 7/27/07 Rev. C A5 Size EINHEITEN Sie können sich die Längeneinheiten anzeigen lassen. Gehen Sie zur Auswahl der Maßeinheiten wie folgt vor. Hinweis: Der Menüpunkt ist nur verfügbar, wenn Sie ENGLISCH als SPRACHE ausgewählt haben. 1. Im Wartungsmodus drücken Sie die Taste Papiertransport oder Papiertransport um EINHEITENanzeigen zu lassen. . Anschließend drücken Sie die Taste Menu 2.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas PAPER.fm 7/27/07 Rev. C A5 Size Kapitel 5 Umgang mit Papier Hinweise zu Epson-Spezialmedien und anderen Medien Obwohl auf den meisten beschichteten Papieren gute Druckergebnisse erzielt werden, schwankt die Druckqualität abhängig von Papierqualität und Hersteller. Prüfen Sie daher die Druckqualität, bevor Sie größere Mengen Papier erwerben. c Vorsicht Berühren Sie die zu bedruckenden Oberflächen nicht.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Epson-Spezialmedien lagern Erhaltung der Qualität von Epson-Spezialmedien: ❏ Lagern Sie unbenutzte Druckmedien in der original Kunststoff- und Außenverpackung, um Feuchtigkeitsprobleme zu vermeiden. ❏ Setzen sie die Druckmedien während der Lagerung nicht hohen Temperaturen, hoher Luftfeuchtigkeit oder direkter Sonneneinstrahlung aus.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Verwendung von Rollenpapier Rollenpapier an der Spindel anbringen Wenn Sie das Rollenpapier auf der Spindel anbringen, befolgen Sie die unten beschriebenen Schritte. 1. Ziehen Sie den schwarzen abnehmbaren Flansch vom Ende der Spindel ab. 2. Zum Anbringen von Rollenpapier mit 2-Zoll-Kern nehmen Sie die grauen Aufsätze ab.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Schieben Sie zum Anbringen von Rollenpapier mit 3-Zoll-Kern die grauen Aufsätze zu den schwarzen und weißen, wobei Sie die vier Pfeile miteinander ausrichten. 3. Legen Sie das Rollenpapier auf eine ebene Unterlage, so dass es sich nicht abwickelt. Schieben Sie das Rollenpapier auf die Spindel und auf den weißen Flansch, bis es gut sitzt.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Abstandhalter an der Spindel anbringen Für einen randlosen Druck von Rollenpapier mit einer Breite zwischen 8 Inches bzw. 420 mm (A2), müssen Sie an der Spindel einen Abstandhalter anbringen. Um den Abstandhalter an der Spindel zu montieren, folgen Sie den unten stehenden Schritten.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas PAPER.fm 7/27/07 Rev. C A5 Size Rollenpapier von der Spindel abnehmen Wenn Sie das Rollenpapier von der Spindel abnehmen möchten, befolgen Sie die unten beschriebenen Schritte. 1. Legen Sie die Spindel mit dem Rollenpapier auf eine ebene Unterlage. 2. Ziehen Sie den schwarzen abnehmbaren Flansch vom Ende der Spindel ab, indem Sie mit der Hand leicht auf das gleiche Ende der Spindel klopfen, um ihn zu lösen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas PAPER.fm 7/27/07 Rev. C A5 Size Rollenpapier einlegen Zum Einlegen des Rollenpapiers führen Sie die nachstehenden Anweisungen aus. 1. Öffnen Sie die Rollenpapierabdeckung. 2. Stellen Sie sicher, dass der schwarze, bewegliche Flansch richtig am Ende der Papierrolle befestigt ist. 3. Halten Sie die Rollenpapierspindel so, dass sich der schwarze, bewegliche Flansch auf der linken Seite befindet.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size 4. Stellen Sie sicher, dass das Rollenpapier richtig am Drucker angebracht ist. 5. Bringen Sie den Papierhebel in die gelöste Position. 6. Halten Sie das Papier an beiden Enden fest und schieben Sie dann das Papier anschließend in den Papierzuführungsschacht. Ziehen Sie an dem Papier, bis es über dem Papierfach hängt.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size 7. Halten Sie sowohl den festen als auch den beweglichen Flansch fest und wickeln Sie das Papier bis zu der Pfeilmarkierung auf. 8. Bringen Sie den Papierhebel in die gesicherte Position. Der Drucker führt das Papier automatisch in die Druckposition ein. Hinweis: Wenn Sie die Taste Pause drücken, führt der Drucker sofort das Papier in die Druckposition ein. 9.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size 10. Heben Sie die Stütze für das Rollenpapier an. 11. Ziehen Sie das Papierfach und die Abdeckung entsprechend der Papiergröße heraus. 12. Drücken Sie die Taste Papierzufuhr , um Rollenpapier Automatisch schneiden Ein oder Rollenpapier Automatisch schneiden Aus auszuwählen. Der Drucker ist jetzt druckbereit. Öffnen Sie nicht die obere Abdeckung, während der Drucker druckt.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Rollenpapiergurt verwenden Der Rollenpapiergurt liegt der optionalen 2/3-Zoll-Doppelspindel für Rollenpapierzufuhr bei. Sie können auch einen optionalen Rollenpapiergurt erwerben. Klopfen Sie zur Verwendung des Rollenpapiergurts leicht mit seinem Ende auf das Rollenpapier. Der Gut wickelt sich von selbst um das Rollenpapier.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas PAPER.fm 7/27/07 Rev. C A5 Size Rollenpapier automatisch abschneiden Führen Sie zum automatischen Abschneiden des Rollenpapiers nach dem Drucken die nachstehenden Anweisungen aus. 1. Drücken Sie vor dem Drucken die Taste Papierzufuhr , um Rollenpapier Automatisch schneiden Ein zu wählen. 2. Drucken Sie die Daten.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas PAPER.fm 7/27/07 Rev. C A5 Size 4. Drücken Sie die Taste Papierzufuhr , umRollenpapier Automatisch schneiden Aus zu wählen. 5. Halten Sie die Taste Papierquelle 3 Sekunden lang gedrückt. Der Drucker schneidet den Ausdruck an der Schneideposition ab.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas PAPER.fm 7/27/07 Rev. C A5 Size Verwendung von Einzelblattmedien Papierweg überprüfen Der Papierweg ändert sich je nach dem Medientyp, den Sie verwenden. Überprüfen Sie immer den Medientyp und seinen Papierweg.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Hinterer, manueller Papierschacht R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Einfüllen von A3 oder größerem Papier in das Papierfach 1. Der Drucker muss eingeschaltet und sich im BEREIT - Status befinden. 2. Drücken Sie die Taste Papierzufuhr auszuwählen. 3. Ziehen Sie das Papierfach und die Abdeckung heraus. 4. Heben Sie die Abdeckung an.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size 5. Ziehen Sie die Walze für die Papierführung hoch und schieben Sie die Führung für den Rand etwas weiter nach links, als das Papier breit ist. 6. Reinigen Sie das Innere der Ablage von Staub. Staub kann die Druckqualität beeinträchtigen. 7. Blättern Sie durch einen Papierstapel und klopfen Sie mit den Kanten auf eine ebene Fläche, um die Ränder wieder glatt auszurichten.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 8. R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Legen Sie das Papier mit der Druckseite nach unten ein. Die rechte Kante des Papiers sollte an die rechte Seite des Papierfachs anliegen. Vergewissern Sie sich, dass die Blätter glatt auf dem Boden des Fachs liegen. Hinweis: ❏ Legen Sie das Papier immer mit der kurzen Seite zuerst ein.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 9. R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Passen Sie die Länge des Papierfachs durch die Führungsschienen der Papiergröße an. 10. Drücken Sie die Walze für die Papierführung herunter. Die Walze der Papierführung muss auf der Kante des Papiers aufliegen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size 11. Passen Sie die Länge der Abdeckung an und befestigen Sie sie am Papierfach. Hinweis: Vergewissern Sie sich, dass der Halter für das Rollenpapier nicht hoch steht. 12. Wenn das Papierfach und die Abdeckung vollständig ausgezogen haben, ziehen Sie auch den Papierhalter heraus, um die großen Ausdrucke zu halten.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Der Drucker ist jetzt druckbereit. Öffnen Sie nicht die obere Abdeckung, während der Drucker druckt. Wenn die obere Abdeckung während des Druckvorgangs geöffnet wird, stoppt der Drucker den Druckvorgang und setzt ihn fort, sobald die obere Abdeckung wieder geschlossen wird. Durch Anhalten und Fortsetzen des Druckbetriebs kann die Druckqualität beeinträchtigt werden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size 4. Ziehen Sie die Papierführung hoch und schieben Sie die Führung für den Rand etwas weiter nach links, als das Papier breit ist. 5. Reinigen Sie das Innere der Ablage von Staub. Staub kann die Druckqualität beeinträchtigen. 6. Blättern Sie durch einen Papierstapel und klopfen Sie mit den Kanten auf eine ebene Fläche, um die Ränder wieder glatt auszurichten.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 7. R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Legen Sie das Papier mit der Druckseite nach unten ein. Die rechte Kante des Papiers sollte an die rechte Seite des Papierfachs anliegen. Vergewissern Sie sich, dass die Blätter glatt auf dem Boden des Fachs liegen. Hinweis: ❏ Legen Sie das Papier immer mit der kurzen Seite zuerst ein.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size 8. Passen Sie die Länge des Papierführung durch die Führungsschienen der Papiergröße an. 9. Ziehen Sie die Walze des Papierfachs herunter und befestigen Sie wieder die Abdeckung für das Papierfach. Hinweis: ❏ Vergewissern Sie sich, dass der Halter für das Rollenpapier nicht hoch steht.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas PAPER.fm 7/27/07 Rev. C A5 Size Der Drucker ist jetzt druckbereit. Öffnen Sie nicht die obere Abdeckung, während der Drucker druckt. Wenn die obere Abdeckung während des Druckvorgangs geöffnet wird, stoppt der Drucker den Druckvorgang und setzt ihn fort, sobald die obere Abdeckung wieder geschlossen wird. Durch Anhalten und Fortsetzen des Druckbetriebs kann die Druckqualität beeinträchtigt werden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size ❏ Sie können jeweils nur ein Blatt auf einmal in den vorderen Einzelblatteinzug eingeben. ❏ Legen Sie das Papier mit der Druckseite nach oben ein. 1. Der Drucker muss eingeschaltet und sich im BEREIT - Status befinden. 2. Drücken Sie die Taste Papierzufuhr auszuwählen. 3. Bringen Sie den Papierhebel in die gelöste Position. , um Einzelblatt AUS PAPIER ENTNEHMEN EIN 4.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size 5. Geben Sie in die Papierausgabe ein Blatt ein. 6. Führen Sie das Papier unter der Walze durch.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size 7. Passen Sie die rechte Seite des Papiers an die Pfeilmarkierung an und die untere Kante des Papiers an der Markierungslinie, die zu der entsprechenden Papiergröße im Papierfach gehört. Wenn Sie Papier der Größe Letter, A4 oder B4 eingelegt haben, stellen Sie den Papierrand auf LTR/A4/B4 ein. Wenn Ihre Papiergröße nicht oben angegeben ist, setzen Sie den Papierrand auf SONSTIGE. 8.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 9. R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Bringen Sie den Papierhebel in die gesicherte Position. Der Drucker führt das Papier automatisch in die Druckposition ein. Hinweis: ❏ Wenn PPR SIZE CHK auf AUS eingestellt ist, erscheint auf dem LCD-Display PAPIER ENTNEHMEN. Für PPR SIZE CHK müssen Sie an dem Bedienfeld des Druckers EIN auswählen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas PAPER.fm 7/27/07 Rev. C A5 Size 10. Ziehen Sie das Papierfach und die Abdeckung entsprechend der Papiergröße heraus. Wenn Sie beide nicht herausziehen, kann der Ausdruck herunterfallen. Hinweis: Vergewissern Sie sich, dass der Halter für das Rollenpapier nicht hoch steht. Der Drucker ist jetzt druckbereit. Öffnen Sie nicht die obere Abdeckung, während der Drucker druckt.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk PAPER.fm 7/27/07 Rev. C A5 Size Papier in das hintere, manuelle Papierfach einlegen Hinweis: ❏ Sie können jeweils nur ein Blatt auf einmal in den hinteren Einzelblatteinzug eingeben. ❏ Legen Sie das Papier mit der Druckseite nach oben ein. ❏ Papier mit einer Stärke zwischen 0,08 und 0,79 mm kann im Querformat eingegeben werden.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 4. PAPER.fm 7/27/07 Rev. C A5 Size Passen Sie die Länge des Papierfachs und die Abdeckung für das Papierfach der Papiergröße an. Wenn Sie beide nicht herausziehen, kann der Ausdruck herunterfallen. Hinweis: Vergewissern Sie sich, dass der Halter für das Rollenpapier nicht hoch steht. Der Drucker ist jetzt druckbereit. Öffnen Sie nicht die obere Abdeckung, während der Drucker druckt.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRANS.fm 7/27/07 Rev. C A5 Size Kapitel 6 Wartung und Transport Tintenpatronen auswechseln Wenn die Anzeige des Druckers blinkt, weist dies darauf hin, dass die Tinte zu Ende geht und Sie eine Ersatz-Tintenpatrone bereitstellen sollten. Leuchtet die Anzeige im Dauerlicht, müssen die leere Tintenpatrone ersetzen. Das LCD-Display zeigt außerdem WENIG TINTE oder KEINE TINTE an.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size 1. Stellen Sie sicher, dass der Drucker eingeschaltet ist. Stellen Sie fest, welche Tintenpatrone nach dem Dauer- oder Blinklicht der Tintenanzeige ersetzt werden muss. 2. Öffnen Sie die Abdeckung des Tintenbehälters, indem Sie darauf drücken. 3. Ziehen Sie die Tintenhebel nach oben in die entriegelte Position.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 4. TRANS.fm 7/27/07 Rev. C A5 Size Ziehen Sie die leere Patrone vorsichtig und gerade aus dem Drucker. w Vorsicht: Wenn Tinte auf Ihre Hände gerät, reinigen Sie diese gründlich mit Wasser und Seife. Sollte Tinte in die Augen gelangen, spülen Sie diese sofort mit reichlich Wasser aus. c Vorsicht: Schütteln Sie keine Patronen, die bereits installiert waren, mit zu viel Kraftaufwand.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 5. R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size Stellen Sie sicher, dass die Ersatzpatrone die richtige Farbe hat und nehmen Sie sie aus der Verpackung. Schütteln Sie die Tintenpatrone gut vor dem Einsetzen, um optimale Ergebnisse zu erzielen. Hinweis: Ein Schutzmechanismus verhindert das falsche Einsetzen der Patronen. Wenn die Patrone sich nicht leicht einsetzen lässt, ist möglicherweise der Patronentyp falsch.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 7. R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size Bringen Sie den Tintenhebel nach unten in die gesicherte Position. Hinweis: Wenn Sie die Tintenpatrone in dem falschen Schacht einsetzen, erscheint KEINE TINTENPATR auf dem LCD-Display. Vergewissern Sie sich, dass die richtige Tintenpatrone im richtigen Schacht eingesetzt wurde. 8. Schließen Sie den Tintenbehälter. Der Drucker kehrt in den vorherigen Status zurück.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size Schwarze Tintenpatronen wechseln Sie können die schwarze Tinte je nach vorgesehenem Zweck auswechseln. Zur Auswahl stehen Matte Black (Mattschwarz) und Photo Black (Fotoschwarz). c Vorsicht: Um beim Auswechseln der schwarzen Tinte eine Unterbrechung zu vermeiden, beachten Sie Folgendes: ❏ Schalten Sie den Drucker nicht aus. ❏ Öffnen Sie nicht die obere Abdeckung.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size 1. Vergewissern Sie sich, dass BEREIT am LCD angezeigt wird. 2. Drücken Sie die Taste Menü 3. Drücken Sie auf Papierzuführung oder die Taste Papierzuführung , um sich auf dem LCD-Bedienungsfeld WARTUNG anzeigen zu lassen und drücken Sie die Taste Menü , um den Menü-Modus aufzurufen. . 4.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size 7. Vergewissern Sie sich, dass LINK.TINTENHEBEL NACH OB. STELLEN am LCD-Display angezeigt wird, und bringen Sie die Tintenhebel am linken Tintenbehälter nach oben. 8. Achten Sie darauf, dass TINTENPATR_ENTF. am LCD-Display angezeigt wird und entnehmen Sie alle vier Tintenpatronen aus dem linken Tintenbehälter.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 9. R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size Achten Sie darauf, dass UMWANDL.PATRONE am LCD-Display angezeigt wird und setzen Sie drei Umwandlungspatronen in die Schächte des linken Tintenbehälters ein. Hinweis: Wenn auf dem LCD-Display UMWANDL.PATRONE ERSET. erscheint, drücken Sie die TastePause . Entnehmen Sie die alte(n) Umwandlungspatrone(n) aus dem linken Tintenbehälter und setzen Sie die neue(n) Umwandlungspatrone(n) ein.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size 11. Der Drucker beginnt die Tinte abzuleiten und ABLAUF XX % wird am LCD-Display angezeigt. Warten Sie, bis die Entleerung beendet ist. 12. Nach der Entleerung wird LINKEN TINTENHEBEL HOCHZIEHEN am LCD-Display angezeigt. Ziehen Sie den Tintenhebel am linken Tintenbehälter nach oben. 13. Achten Sie darauf, dass UMWANDL.PATRONE ENTF.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size 14. Vergewissern Sie sich, dass auf dem LCD-Display TINTENPATR_INST. erscheint und setzen Sie die Patronen in ihre entsprechenden Schächte ein. 15. Achten Sie darauf, dass BEIDE TINTENHEBEL NACH UNTEN BEWEGEN am LCD-Display angezeigt wird und stellen Sie die Tintenhebel am rechten und linken Tintenbehälter nach unten.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size 16. Vergewissern Sie sich, dass BEIDE TINTENHEBEL NACH OB. STELLEN am LCD-Display angezeigt wird, und bringen Sie die Tintenhebel am rechten und linken Tintenbehälter nach oben. 17. Der Drucker beginnt mit der Befüllung des Tintenzuleitungssystems. Nach einer Weile werden Tintenhebel-Meldungen am LCD-Display angezeigt.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size Druckertreiberinformationen aktualisieren Führen Sie die nachstehenden Anweisungen aus, um nach dem Auswechseln die Treiberinformation zu aktualisieren. Windows Klicken Sie auf die Registerkarte Haupteinstellungen und vergewissern Sie sich, dass die richtige Tintenpatrone angezeigt wird.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size Wartungstank ersetzen Wenn auf dem LCD-Display WARTTK VOLL oder WARTTK FAST VOLL erscheint, müssen Sie den Wartungstank austauschen. Den Produktcode des Wartungstanks finden Sie unter “Verbrauchsmaterialien” auf Seite 329. Führen Sie zum Ersetzen des Wartungstanks die nachstehenden Anweisungen aus. 1.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRANS.fm 7/27/07 Rev. C A5 Size 5. Setzen Sie den neuen Wartungstank ein. 6. Nur EPSON Stylus Pro 4880/4880C: Wenn Sie 220 ml Tintenpatronen verwenden, setzen Sie alle vier Tintenpatronen neu ein. Ersetzen des Papierschneiders Wenn der Papierschneider nicht sauber schneidet, könnte er stumpf sein und muss ersetzt werden.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. TRANS.fm 7/27/07 Rev. C A5 Size Drücken Sie auf Papierzuführung oder auf die Taste Papierzuführung , um sich auf dem LCD-Display SCHNEIDE_AUST anzeigen zu lassen. Hinweis: Sie können auch folgende Schritte gehen. Drücken Sie auf Papierzuführung oder auf die Taste Papierzuführung , um sich auf dem LCD-Display WARTUNG anzeigen zu lassen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 6. TRANS.fm 7/27/07 Rev. C A5 Size Wenn SCHNEIDWERK_ERSET. auf der LCD-Anzeige angezeigt wird, drücken Sie den seitlichen Stift, während Sie die Abdeckung des Papierschneiders nach rechts drehen, um das Gehäuse zu öffnen. c Vorsicht: Achten Sie darauf, dass Sie nicht die hervorgehobenen Teile berühren; ansonsten kann der Drucker beschädigt werden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size 7. Nehmen Sie langsam Ihren Finger vom seitlichen Stift und nehmen Sie vorsichtig den alten Papierschneider aus dem Drucker heraus. 8. Nehmen Sie die neue Klinge aus der Verpackung. 9. Setzen Sie die neue Klinge ganz in den Halter des Papierschneiders ein. Stellen Sie sicher, dass der seitliche Stift des Papierschneiders ganz links steht.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size 10. Währen Sie den seitlichen Stift drücken, drehen Sie die Abdeckung des Papierschneiders nach links, um das Gehäuse zu schließen. Hinweis: Achten Sie darauf, dass die Abdeckung für den Papierschneider richtig eingestellt ist; ansonsten kann das Papier nicht geschnitten werden. 11. Vergewissern Sie sich, dass OBERE_ABDECKUNG_SCHLIESSEN erscheint und schließen Sie die obere Abdeckung.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRANS.fm 7/27/07 Rev. C A5 Size Drucker reinigen Damit der Drucker sich immer in einem optimalen Betriebszustand befindet, sollten Sie ihn gründlich reinigen, wenn er verschmutzt ist. w Vorsicht: Achten Sie darauf, dass Sie die Zahnräder im Inneren des Druckers nicht berühren. c Vorsicht: ❏ Reinigen Sie den Drucker niemals mit Alkohol oder Verdünner. Diese Chemikalien könnten die Bauteile und das Gehäuse beschädigen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRANS.fm 7/27/07 c Rev. C A5 Size Vorsicht: Um Ausdrucke nicht zu beeinträchtigen, sollten Sie die folgenden Teile nicht berühren.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 2. TRANS.fm 7/27/07 Rev. C A5 Size Öffnen Sie die obere Abdeckung und verwenden Sie ein weiches, sauberes Tuch, um vorsichtig Staub und Schmutz im Innern des Druckers zu entfernen. Wischen Sie die grauen Teile und folgen Sie dabei den Pfeilrichtungen. Wenn sich im Drucker innen viel Schmutz angesammelt hat, reinigen Sie den Drucker mit einem weichen, sauberen und in einem milden Reinigungsmittel angefeuchteten Tuch.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size 3. Wenn die Rückseite eines Ausdrucks verschmutzt ist, reinigen Sie die Platten (die grauen Teile) vorsichtig mit einem weichen, sauberen Tuch. 4. Haftet pulverförmiger Papierstaub an der Druckwalze, entfernen Sie ihn mit einem Gegenstand wie beispielsweise einem Zahnstocher. Schließen Sie die obere Abdeckung. 5.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size Wenn Sie Ihren Drucker über einen längeren Zeitraum nicht benutzt haben Wenn Sie den Drucker über einen längeren Zeitraum nicht benutzt haben, können die Druckdüsen verstopft sein. Führen Sie einen Düsentest durch und reinigen Sie den Druckkopf. Informationen zum Durchführen eines Düsentests über das Bedienfeld finden Sie unter “Druckkopfdüsen überprüfen” auf Seite 173.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRANS.fm 7/27/07 Rev. C A5 Size Drucker transportieren Über eine weite Entfernung Soll der Drucker über eine weite Strecke transportiert werden, verpacken Sie ihn wieder in der Originalverpackung und mit den ursprünglichen Verpackungsmaterialien. Führen Sie zum Verpacken des Druckers die nachstehenden Schritte aus. 1. Vergewissern Sie sich, dass der Drucker eingeschaltet ist. 2. Entfernen Sie die folgenden Teile.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 5. TRANS.fm 7/27/07 Rev. C A5 Size Um den Druckkopf festzustellen, drücken Sie den grünen Tabulator an der linken Seite des Druckkopfes nach rechts. c Vorsicht: Achten Sie darauf, dass Sie nicht die hervorgehobenen Teile berühren; ansonsten kann der Drucker beschädigt werden. 6. Vergewissern Sie sich, dass die Tintenhebel nach oben stehen und schalten Sie dann den Drucker aus. 7.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRANS.fm 7/27/07 Rev. C A5 Size Über eine kurze Entfernung Wenn Sie den Drucker nur über eine geringe Entfernung transportieren müssen, beachten Sie Folgendes: ❏ Ziehen Sie die Tintenhebel nach oben. ❏ Heben Sie den Drucker mit mindestens zwei Personen hoch. Die Druckereinheit wiegt ca. 50 kg (110,3 lb) und muss vorsichtig angehoben werden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRANS.fm 7/27/07 Rev. C A5 Size ❏ Wenn Sie nach dem Transport das erste Mal drucken oder den Drucker längere Zeit nicht benutzt haben, können die Druckkopfdüsen verstopft sein. Epson empfiehlt, einen Düsentest durchzuführen und den Druckkopf zu reinigen sowie den Druckkopf neu auszurichten, um eine optimale Druckqualität zu gewährleisten.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Kapitel 7 Problembeheber Fehlerbehebung Der Drucker hört unerwartet auf zu drucken Druckkopfreinigung, Tintenzufuhr oder Tinte wird gerade getrocknet Überprüfen Sie, ob die Pausenanzeige leuchtet. Wenn ja, reinigt der Drucker gerade den Druckkopf, es wird eine Tintenpatrone gewechselt oder die Tinte wird getrocknet.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Fehlermeldungen Meldung Beschreibung Maßnahme DRUCKEN NICHT MÖGL. Beim Drucken von Testmustern für den Düsentest oder die Druckkopf-Ausrichtung kann ein Fehler vorkommen. Verlassen Sie zuerst das Menü TESTDRUCK und beheben Sie den am LCD-Display angezeigten Fehler. Versuchen Sie dann erneut, die Testmuster zu drucken. WARTTK_FAST_VOLL Der Wartungstank ist fast voll.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size PAPIERTYP ÄNDERN Das eingelegte Papier entspricht nicht der gewählten Papiersorte. Legen Sie Papier entsprechend der gewählten Papiersorte ein. Siehe “Tasten” auf Seite 145. FALSCHE PAPIERGRÖßE Die eingelegte Papiergröße stimmt nicht mit den Druckdaten überein. Stimmen Sie die eingelegte Papiergröße mit den Druckdaten ab. KEIN PAPIER Es befindet sich kein Papier im Drucker.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas PAPIER NICHT GESCHNITTEN R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rollenpapier Automatisch schneiden Ein ist gewählt, aber das Papier wird nicht einwandfrei abgeschnitten. Rev. C A5 Size Öffnen Sie die obere Abdeckung und entfernen Sie das ungeschnittene Papier. Wenn auf dem LCD-Display PAPIER NACHLEGEN erscheint, legen Sie Papier nach. Möglicherweise ist der Papierabschneider nicht einwandfrei installiert.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TREIBERTINTENS. EINSTEL. FALSCH R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Die Patronenoption des Druckertreibers wurde noch nicht geändert. Stoppen Sie den Druckvorgang und halten Sie die Taste Pause für 3 Sekunden gedrückt. Wählen Sie anschließend im Druckertreiber die richtige Tintenpatrone gemäß dem derzeitigen Tintenpatronensatz im Drucker aus. Siehe “Druckertreiberinformati onen aktualisieren” auf Seite 238.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size UNGÜLTIG._MEDIUM IN PAP. FACH Das Einzelblatt, das entweder in das vordere oder hintere, manuelle Papierfach eingelegt werden muss, wird von dem Papierfach eingezogen. Entfernen Sie das Einzelblatt aus dem Papierfach und legen Sie es korrekt in den entsprechenden Einzelblatteinzug ein. Siehe “Papierweg überprüfen” auf Seite 206. EINZELBLATTPAP.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size DIE PATRONE, DIE NICHT ORIGINAL IST, WIRD WAHRSCHEINLICH NICHT DIE OPTIMALE LEISTUNG ERBRINGEN. FORTFAHREN? Eine Tintenpatrone, die nicht von Epson stammt, ist eingesetzt. Wählen Sie NEIN (drücken Sie die Taste Menü ), um die Tintenpatrone durch eine originale Epson-Tintenpatrone zu ersetzen. Siehe “Tintenpatronen auswechseln” auf Seite 226.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size TINTENPATR_INST. Ein Fehler ist während des Lesens oder Schreibens von Daten aufgetreten. Entnehmen Sie die Tintenpatrone und setzen Sie sie wieder ein. Wenn diese Meldung auch nach dem Wiedereinsetzen der Patrone angezeigt wird, ersetzen Sie die Patrone durch eine neue. Siehe “Tintenpatronen auswechseln” auf Seite 226.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size FREIGABEHEBEL PAPIERSTAU_BEHEBE N Papierstau im Drucker Lösen Sie zunächst den Papierhebel Lösen Sie den Papierhebel und nehmen Sie das gestaute Papier heraus.. Wenn auf dem LCD-Display DRUCKER_AUS-_UND DANN_EINSCHALTEN erscheint, schalten Sie den Drucker aus, warten Sie eine Weile und schalten Sie ihn dann wieder ein. Siehe “Papierstaus beheben” auf Seite 278.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Der Drucker schaltet sich nicht ein oder bleibt nicht eingeschaltet Wenn beim Einschalten des Druckers durch Drücken des Netzschalters die Anzeige Pause nicht leuchtet und die mechanische Initialisierung nicht startet, probieren Sie die folgenden Problemlösungen aus. ❏ Schalten Sie den Drucker aus und vergewissern Sie sich, dass das Netzkabel einwandfrei am Drucker angeschlossen ist.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size ❏ Stellen Sie sicher, dass die Spezifikationen des Schnittstellenkabels denen des Druckers und des Computers entsprechen. ❏ Stellen Sie sicher, dass das Schnittstellenkabel direkt mit dem Computer verbunden ist, ohne durch irgendein Bauteil geführt zu sein, wie ein Drucker-Umschaltgerät oder eine Kabelverlängerung. Der Epson-Drucker ist nicht als Standarddrucker ausgewählt.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Windows 2000 1. Klicken Sie auf die Schaltfläche Start, zeigen Sie auf Einstellungen und wählen Sie Drucker. 2. Klicken Sie mit der rechten Maustaste auf das Symbol EPSON Stylus Pro XXXX . 3. Wählen SieAls Standard definieren und schließen Sie dann das Drucker-Fenster. Mac OS X Stellen Sie sicher, dass der Druckertreiber Stylus Pro XXXX richtig zum Print Center (Mac OS X 10.2.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Für Windows Vista 1. Klicken Sie auf Systemsteuerung, dann auf Hardware und Sound und anschließend auf Drucker. 2. Klicken Sie mit der rechten Maustaste auf das Symbol EPSON Stylus Pro XXXX und wählen Sie anschließend Eigenschaften. 3. Klicken Sie auf die Registerkarte Anschlüsse. 4. Stellen Sie sicher, dass Ihr Druckeranschluss ausgewählt ist. Windows 2000 1.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Die Ausdrucke entsprechen nicht den Erwartungen Es werden falsche oder unvollständige Zeichen gedruckt oder leere Seiten ausgegeben. Versuchen Sie eine oder mehrere der folgenden Lösungen: ❏ Löschen Sie unter Windows die angehaltenen Druckaufträge im Fenster des Fortschrittsbalkens. Siehe “Druckauftrag in der Warteschlange löschen.” auf Seite 29.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Gespiegelte Grafiken Deaktivieren Sie unter Mac OS X die Einstellung Horizontal spiegeln im Dialogfeld Druckeinstellungen. Einzelheiten finden Sie in der Online-Hilfe. Druckfarben unterscheiden sich von Bildschirmfarben Versuchen Sie eine oder mehrere der folgenden Lösungen: ❏ Stellen Sie die Farbdichte im Dialogfeld Papierkonfiguration ein. Einzelheiten finden Sie in der Online-Hilfe.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Gerade Linien sind verschoben Führen Sie die Ausrichtung der Druckköpfe durch. Sollte das Problem fortbestehen, führen Sie die Druckkopfreinigung durch. Für Windows siehe “Druckerhilfsprogramme verwenden” auf Seite 31. Für Mac OS X siehe “Druckerhilfsprogramme verwenden” auf Seite 53.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Die Druckqualität entspricht nicht den Erwartungen Klicken Sie auf die Überschrift unter der Abbildung, die Ihrem Ausdruck am nächsten kommt.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Horizontale Streifen Versuchen Sie eine oder mehrere der folgenden Lösungen: ❏ Unter Windows prüfen Sie die Medientyp-Einstellungen in den Haupteinstellungen. Stellen Sie sicher, dass diese für den von Ihnen verwendeten Papiertyp richtig sind. Einzelheiten finden Sie in der Online-Hilfe. Überprüfen Sie unter Mac OS X die Einstellung Medientyp unter Druckeinstellungen im Dialogfeld Drucken.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Vertikale Streifen oder Fehlausrichtung Versuchen Sie eine oder mehrere der folgenden Lösungen: ❏ Deaktivieren Sie unter Windows die Einstellung Schnell in den Qualitätsoptionen. Einzelheiten finden Sie in der Online-Hilfe. Deaktivieren Sie unter Mac OS X dieSchnelligkeit unter Druckeinstellungen im Dialogfeld Drucken. Einzelheiten finden Sie in der Online-Hilfe.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Es ist auch möglich, die Druckkopfdüsen vom Bedienfeld aus zu reinigen. Zum Reinigen der Druckkopfdüsen halten Sie die Taste Menü r 3 Sekunden gedrückt. ❏ Prüfen Sie die Anzeige Tinte. Ersetzen Sie die Tintenpatronen, falls nötig. Siehe “Tintenpatronen auswechseln” auf Seite 226. ❏ Wählen Sie Standard als Walzenabstand im Dialogfeld Papierkonfiguration.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Es ist auch möglich, die Druckkopfdüsen vom Bedienfeld aus zu reinigen. Zum Reinigen der Druckkopfdüsen halten Sie die Taste Menü r 3 Sekunden gedrückt. Farbige Dokumente werden nur schwarz gedruckt Versuchen Sie eine oder mehrere der folgenden Lösungen: ❏ Stellen Sie sicher, dass in Ihren Einstellungen die Farbeinstellungen richtig sind.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size ❏ Für Windows wählen Sie aus der Druckqualität im Hauptmenü Qualitätsoptionen aus. In dem Dialogfeld Qualitätsoptionen bewegen Sie die Schieber in Richtung Schnell, um die Druckgeschwindigkeit zu erhöhen. Einzelheiten finden Sie in der Online-Hilfe.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size ❏ Schneiden Sie das Rollenpapier von Hand, falls nötig. Prüfen Sie, ob die Stärke des in den Drucker eingelegten Papiers mit der Spezifikation übereinstimmt (siehe “Papier” auf Seite 321). Falls ja, könnte der Papierschneider stumpf sein und muss ersetzt werden. Siehe “Ersetzen des Papierschneiders” auf Seite 240.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size ❏ Unter Windows prüfen Sie die Medientyp-Einstellungen in den Haupteinstellungen. Stellen Sie sicher, dass diese für den von Ihnen verwendeten Papiertyp richtig sind. Einzelheiten finden Sie in der Online-Hilfe. Überprüfen Sie unter Mac OS X die Einstellung Medientyp unter Druckeinstellungen im Dialogfeld Drucken.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Papierstaus beheben Wenn Rollenpapier gestaut ist Um einen Papierstau beim Rollenpapier zu beheben, führen Sie die nachstehenden Anweisungen aus. 1. Schalten Sie den Drucker aus. 2. Öffnen Sie die Abdeckung für das Rollenpapier und bringen Sie dann den Papierhebel in die gelöste Position.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size 3. Schneiden Sie das Papier am Papier-Zufuhrschacht ab und entfernen Sie das Rollenpapier. 4. Entfernen Sie den Papierstau an der vorderen oder hinteren Seite des Druckers.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Falls nötig öffnen Sie die obere Abdeckung und nehmen das gestaute Papier heraus.. c Vorsicht: Achten Sie darauf, dass Sie nicht die hervorgehobenen Teile berühren; ansonsten kann der Drucker beschädigt werden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Papierstau während der Papierzufuhr Um einen Papierstau zu beheben, führen Sie die nachstehenden Anweisungen aus. 1. Schalten Sie den Drucker aus. 2. Bringen Sie den Papierhebel in die gelöste Position. 3. Entfernen Sie das Papierfach vom Drucker.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 4. R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Entfernen Sie vorsichtig das gestaute Papier. Falls nötig öffnen Sie die obere Abdeckung und nehmen das gestaute Papier heraus..
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas c R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Vorsicht: Achten Sie darauf, dass Sie nicht die hervorgehobenen Teile berühren; ansonsten kann der Drucker beschädigt werden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Wenn ein Papierstau an der hinteren Abdeckung vorliegt, entfernen Sie die hintere Abdeckung, indem Sie die Stützen zusammendrücken und das gestaute Papier herausnehmen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 c Rev. C A5 Size Vorsicht: Achten Sie darauf, dass Sie nicht die hervorgehobenen Teile berühren; ansonsten kann der Drucker beschädigt werden. Papierstau beim Einzelblatteinzug Um einen Papierstau zu beheben, führen Sie die nachstehenden Anweisungen aus. 1. Schalten Sie den Drucker aus. 2. Bringen Sie den Papierhebel in die gelöste Position.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. TRBLE.fm 7/27/07 Rev. C A5 Size Entfernen Sie den Papierstau an der vorderen oder hinteren Seite des Druckers.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 c Rev. C A5 Size Vorsicht: Achten Sie darauf, dass Sie nicht die hervorgehobenen Teile berühren; ansonsten kann der Drucker beschädigt werden. Papierstau beim hinteren Einzelblatteinzug Um einen Papierstau zu beheben, führen Sie die nachstehenden Anweisungen aus. 1. Schalten Sie den Drucker aus. 2. Bringen Sie den Papierhebel in die gelöste Position.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas 3. R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Gestautes Papier aus der Vorderseite nehmen. Falls nötig öffnen Sie die obere Abdeckung und nehmen das gestaute Papier heraus..
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas c R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Vorsicht: Achten Sie darauf, dass Sie nicht die hervorgehobenen Teile berühren; ansonsten kann der Drucker beschädigt werden.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size So erreichen Sie unseren Kundendienst Neu :Für alle Produkte Bevor Sie sich an Epson wenden Wenn dieses Epson-Produkt nicht ordnungsgemäß funktioniert und Sie das Problem nicht mit Hilfe der Informationen zur Fehlerbehebung in der Produktdokumentation lösen können, wenden Sie sich an den Epson-Kundendienst.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Hilfe für Benutzer in Nordamerika Epson bietet die unten aufgeführten technischen Supports. Neu :Verwenden Sie ausschließlich Inkjet, SPC und "weitere" Produkte. Internet Support Besuchen Sie die Epson Support Webseite http://support.epson.com und wählen Sie Ihr Produkt für die allgemeine Fehlerbehebung aus.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Kauf von Verbrauchsmaterial und Zubehör Sie können originale Epson-Tintenpatronen, Farbbandkassetten, Papier und Zubehör bei jedem autorisierten Epson-Händler kaufen. Den nächsten Händler finden Sie unterr 800-GO-EPSON (800-463-7766). Oder Sie kaufen Online bei http://www.epsonstore.com (Verkauf in Nordamerika) oder http://www.epson.ca (Verkauf in Kanada).
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Epson Helpdesk Der Epson Helpdesk ist als letzte Lösung gedacht, um unseren Kunden Rat geben zu können. Die Mitarbeiter im Helpdesk können Sie bei der Installation, Konfiguration und bei dem Betrieb Ihres Epson-Produkts unterstützen. Unsere Mitarbeiter im Vorverkauf-Helpdesk versorgen Sie mit Literatur über Espon-Produkte, wo Ihr nächster Händler ist oder wo Sie einen Vertreter finden.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size ❏ Verkaufsanfragen und Produktinformationen ❏ Fragen zur Produktverwendung oder Fehlern ❏ Fragen zum Reparaturservice und zur Garantie Hilfe in Thailand Kontakt für Informationen, Support und Services unter: Neu :Für alle Produkte World Wide Web (http://www.epson.com.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Hilfe in Indonesien Kontakt für Informationen, Support und Services unter: Neu :Für alle Produkte World Wide Web (http://www.epson.com.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Yogyakarta Hotel Natour Garuda Jl. Malioboro No. 60 Yogyakarta Telefon: (62) 274-565478 Medan Wisma HSBC 4th floor Jl. Diponegoro No. 11 Medan Telefon/Fax: (62) 61-4516173 Makassar MTC Karebosi Lt. Ill Kav. P7-8 JI. Ahmad Yani No.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Hilfe in Hongkong Für technischen Support und anderen Kundendienstleistungen können Benutzer Epson Hong Kong Limited kontaktieren.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Hilfe in Malaysia Kontakt für Informationen, Support und Services unter: Neu :Für alle Produkte World Wide Web (http://www.epson.com.sg) ❏ Es sind Informationen über Produktspezifikationen, Treiber zum Download ❏ Häufig gestellte Fragen (FAQ), Verkaufsanfragen, Fragen über E-Mail Epson Trading (M) Sdn. Bhd. Hauptverwaltung.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Hilfe in Indien Kontakt für Informationen, Support und Services unter: Neu :Für alle Produkte World Wide Web (http://www.epson.com.sg) Es sind Informationen über Produktspezifikationen, Treiber zum Download und Produktanfragen verfügbar.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Service (CDMA & Mobile Benutzer) - 3900 1600 (9-18 Uhr) örtliche Vorwal Hilfe auf den Philippinen Für technischen Support und anderen Kundendienstleistungen können Benutzer Epson Philippines Corporation unter folgenden Telefon-, Faxnummern und E-Mail-Adressen erreichen: Neu :Für alle Produkte Telefon: (63) 2-813-6567 Fax: (63) 2-813-6545 E-Mail: epchelpdesk@epc.epson.com.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Papierinformationen Epson bietet Druckmedien an, die speziell auf Tintenstrahldrucker zugeschnitten sind und den höchsten Qualitätsanforderungen entsprechen. Teil Erläuterung Medienbezeichnung Beschreibt die Medienbezeichnung. Empfohlene Anwendung Beschreibt die empfohlene Anwendung für das Medium. Format Beschreibt die Papiergröße für Einzelblätter und die Breite für Rollenpapier.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Rollenpapier Premium Glossy Photo Paper (250) (Premium-Hochglanz-Fotopapier (250)) Empfohlene Anwendung Fotograf / Kontaktfarbtest Format Randlos Stärke Kerndurch messer Spannung der Spindel R 0,27 mm 3" Normal 406 mm 16" ICC-Profil Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 PGPP250.icc - Medientyp des Druckertreibers Auto Cut (Autom.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Premium Luster Photo Paper (260) (Premium-Glanzfotopapier (260)) Empfohlene Anwendung Fotograf Format Randlos Stärke Kerndurch messer Spannung der Spindel R 0,27 mm 3" Normal 254 mm 10" 300 mm 406 mm 16" ICC-Profil Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 PLPP260.icc - Medientyp des Druckertreibers Auto Cut (Autom.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Premium Glossy Photo Paper (170) (Premium-Hochglanz-Fotopapier (170)) Empfohlene Anwendung Fotograf / Kontaktfarbtest Format Randlos Stärke Kerndurch messer Spannung der Spindel 420 mm (A2) R* 0,18 mm 2" Normal ICC-Profil Medientyp des Druckertreibers Auto Cut (Autom. Trennen) Photo Paper (Fotopapier) J Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 PGPP170.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Singleweight Matte Paper (Mattes Singleweight-Papier) Empfohlene Anwendung Beschilderung im Innenbereich / Farbtest Format Randlos Stärke Kerndurch messer Spannung der Spindel Möglich 0,14 mm 2" Normal 432 mm 17" ICC-Profil Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 SWMP_PK.icc Pro4880 SWMP_MK.icc Medientyp des Druckertreibers Auto Cut (Autom.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Epson Proofing Paper Publication (Abzugspapier für Veröffentlichungen) Empfohlene Anwendung Vertragsprüfung Format Randlos Stärke Kerndurch messer Spannung der Spindel Möglich 0,2 mm 3" Normal 329 mm 13" 432 mm 17" ICC-Profil Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 Proof_WS.icc - Medientyp des Druckertreibers Auto Cut (Autom.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size UltraSmooth Fine Art Paper (Ultraglattes Kunstdruckpapier) Empfohlene Anwendung Fotograf / Kunstdruck Format Randlos Stärke Kerndurch messer Spannung der Spindel Möglich 0,32 mm 3" Hoch 432 mm 17" ICC-Profil Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 USFAP_PK.icc Pro4880 USFAP_MK.icc Medientyp des Druckertreibers Auto Cut (Autom.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Einzelblätter Premium Glossy Photo Paper (Premium-Hochglanz-Fotopapier) Empfohlene Anwendung Fotograf / Kontaktfarbtest Format Randlos Stärke A4 Empfohlen 0,27 mm Letter A3 Super A3/B 8" × 10" Nicht möglich 10" × 12" Empfohlen 11" × 14" Nicht möglich ICC-Profil Medientyp des Druckertreibers Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 PGPP.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Premium Luster Photo Paper (Premium-Glanzfotopapier) Empfohlene Anwendung Fotograf / Kontaktfarbtest Format Randlos Stärke Letter Empfohlen 0,27 mm Super A3/B ICC-Profil Medientyp des Druckertreibers Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 PLPP.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Photo Quality Ink Jet Paper (Fotoqualität-Tintenstrahlpapier) Empfohlene Anwendung Beschilderung im Innenbereich / Farbtest Format Randlos Stärke A4 Empfohlen 0,12 mm Letter ICC-Profil Medientyp des Druckertreibers Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 PQIJP_PK.icc Pro4880 PQIJP_MK.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Enhanced Matte Paper (Mattes Papier extra) Empfohlene Anwendung Beschilderung im Innenbereich / Fotograf / Kunstdruck / Farbtest Format Randlos Stärke A4 Empfohlen 0,26 mm Letter A3 Super A3/B A2 Nicht möglich US-C Empfohlen ICC-Profil Medientyp des Druckertreibers Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 EMP_PK.icc Pro4880 EMP_MK.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size Archival Matte Paper (Mattes Archivpapier) Empfohlene Anwendung Beschilderung im Innenbereich / Fotograf / Kunstdruck / Farbtest Format Randlos Stärke A4 Empfohlen 0,26 mm A3 Super A3/B ICC-Profil Medientyp des Druckertreibers Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 ARMP_PK.icc Pro4880 ARMP_MK.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas TRBLE.fm 7/27/07 Rev. C A5 Size UltraSmooth Fine Art Paper (Ultraglattes Kunstdruckpapier) Empfohlene Anwendung Fotopapier / Kunstdruckpapier Format Randlos Stärke Super A3/B Möglich 0,46 mm A2 Nicht möglich US-C Möglich ICC-Profil Medientyp des Druckertreibers Photo Black (Fotoschwarz) Matte Black (Mattschwarz) Pro4880 USFAP_PK.icc Pro4880 USFAP_MK.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk TRBLE.fm 7/27/07 Rev. C A5 Size Website für technischen Support Die Internetseite für technischen Support von Epson bietet Ihnen Hilfe bei Problemen, die sich nicht anhand der Informationen zur Problemlösung in der Druckerdokumentation beheben lassen. Wenn Sie Zugriff zum Internet haben, besuchen Sie die Seite: http://support.epson.net/index.htm?product=Stylus_Pro_4450 http://support.epson.net/index.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas INFOR.fm 7/27/07 Rev.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas Rastergrafik-M odus INFOR.fm 7/27/07 Rev.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas INFOR.fm 7/27/07 Rev. C A5 Size Druckbereich A: B-L: B-R: C: A: B-L: B-R: C: Rollenpapier Der obere Rand beträgt mindestens 3,0 mm. Einzelblätter Der obere Rand beträgt mindestens 3,0 mm. Rollenpapier Der linke Rand beträgt mindestens 0 mm. Einzelblätter Der linke Rand beträgt mindestens 0 mm. Rollenpapier Der rechte Rand beträgt mindestens 0,0 mm. Einzelblätter Der rechte Rand beträgt mindestens 0 mm.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas INFOR.fm 7/27/07 Rev. C A5 Size Die nachstehende Tabelle enthält die Standard-Papierränder für das Papier.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas INFOR.fm 7/27/07 Rev. C A5 Size Elektrisches System Nennspannung 100 bis 240 V Eingangsspannungsbereich 90 bis 264 V Frequenzbereich 50 bis 60 Hz Eingangsfrequenzbereich 49 bis 61 Hz Nennstrom 1.0 - 0.5 A Stromaufnahme Ca. 55 W 5 W oder weniger im Energiesparmodus 1 W oder weniger im ausgeschalteten Modus Hinweis: Hinweise zur Spannung finden Sie auf dem Etikett auf der Rückseite des Druckers.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas INFOR.fm 7/27/07 Rev. C A5 Size Betriebsbedingungen (Temperature und Luftfeuchtigkeit): Normen und Zertifizierungen Sicherheit UL 60950 CSA C22.2 No.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk INFOR.fm 7/27/07 Rev.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk INFOR.fm 7/27/07 Rev.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas INFOR.fm 7/27/07 Rev. C A5 Size ❏ Wenn das Papier wellig oder gefaltet ist, glätten Sie es vor dem Einlegen.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk INFOR.fm 7/27/07 Rev. C A5 Size Hinweis: ❏ Die mit dem Drucker gelieferten Tintenpatronen wurden teilweise für die Installation verwendet. Um hochwertige Ausdrucke zu erstellen, wird sich der Druckkopf in Ihrem Drucker komplett mit Tinte füllen. Dieser einmalige Prozess verbraucht eine gewisse Tintenmenge. Daher können Sie mit diesen Patronen weniger Seiten drucken, als mit den folgenden Tintenpatronen.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas INFOR.fm 7/27/07 Rev. C A5 Size Systemanforderungen Der Computer muss die folgenden Systemvoraussetzungen erfüllen: Verwendung des Druckers unter Windows Betriebssystem Windows Vista x64, Vista, XP x64, XP, 2000 CPU Pentium 4 1.4 GHz oder höherer Prozessor Speicher 256 MB RAM oder mehr Festplattenspeicher 3 GB freier Festplattenspeicher oder mehr Schnittstelle USB2.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk INFOR.fm 7/27/07 Rev. C A5 Size Drucker unter Mac OS X verwenden Betriebssystem PowerPC-basierte Macintosh Computers mit Mac OS X 10.2.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas INFOR.fm 7/27/07 Rev. C A5 Size Schnittstellen-Spezifikationen Dieser Drucker ist mit einer USB-Schnittstelle und einer Ethernet-Schnittstelle ausgerüstet. USB-Schnittstelle Die im Drucker eingebaute USB-Schnittstelle entspricht den Normen Universal Serial Bus Specifications Revision 2.0, Universal Serial Bus Specification Revision 1.1 und Universal Serial Bus Device Class Definition for Printing Devices Version 1.1.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas OPTIO.fm 7/27/07 Rev. C A5 Size Kapitel 9 Optionen und Verbrauchsmaterialien Optionen Die folgenden Optionen sind für Ihren Drucker verfügbar: Hinweis: Die Verfügbarkeit von Optionen und Verbrauchsmaterialien unterscheidet sich je nach Region. Rollenpapierspindel Zur Verwendung der optionalen Spindeln siehe “Verwendung von Rollenpapier” auf Seite 195.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk OPTIO.fm 7/27/07 Rev. C A5 Size Verbrauchsmaterialien Für Ihren Drucker sind die folgenden Verbrauchsmaterialien erhältlich. Papierschneider Wenn Sie eine unsaubere Schnittkante feststellen, können Sie die Klinge des Papierschneiders austauschen. Siehe “Ersetzen des Papierschneiders” auf Seite 240. Autom. Papierschneider, Ersatzklinge C12C815291 Wartungstank Dieser Tank nimmt abgegebene Flüssigkeit auf.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas OPTIO.fm 7/27/07 Rev.
R41AA177P (A+) all.bk Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas OPTIO.fm 7/27/07 Rev. C A5 Size Epson-Spezialmedien Die meisten Normalpapiere funktionieren in Ihrem Drucker problemlos. Außerdem bietet Epson Druckmedien an, die speziell auf Tintenstrahldrucker zugeschnitten sind und den höchsten Qualitätsanforderungen entsprechen. Ausführliche Informationen finden Sie unter “Papierinformationen” auf Seite 301.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk GLOSS.fm 7/27/07 Rev. C A5 Size Glossar Folgende Definitionen gelten speziell für Drucker. Auflösung Anzahl der Punkte pro Zoll, die verwendet werden, um ein Bild darzustellen. Anwendung Softwareprogramm, das Ihnen bei der Ausführung einer bestimmten Aufgabe behilflich ist, wie z.B. Textverarbeitung oder Finanzplanung. Ausrichtung der Druckköpfe Das Verfahren zur Korrektur der Ausrichtung evtl.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk GLOSS.fm 7/27/07 Rev. C A5 Size Druckkopfreinigung Das Verfahren zur Reinigung verstopfter Düsen für einen fehlerfreien Ausdruck. DMA Abkürzung für Direct Memory Access (direkter Speicherzugriff). Eine Funktion zur Datenübertragung, die die CPU des Computers umgeht und eine direkte Kommunikation zwischen dem Speicher des Computers und den Peripheriegeräten (wie z.B. Drucker) erlaubt.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk GLOSS.fm 7/27/07 Rev. C A5 Size EWarteschlange Empfängt ein Netzwerkdrucker, der gerade einen Druckauftrag bearbeitet, weitere Druckaufträge, werden diese in eine Warteschlange eingereiht, bis der Drucker frei wird und sie ausdrucken kann. ESC/P Abkürzung für Epson Standard Code for Printers. Dieser Befehlssatz ermöglicht die Steuerung des Druckers vom Computer aus.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk GLOSS.fm 7/27/07 Rev. C A5 Size LCD Flüssigkristallanzeige. Zeigt verschiedene Meldungen, ja nach Druckerstatus. Lokaler Drucker Der Drucker, der per Schnittstellenkabel direkt mit dem Druckeranschluss des Computers verbunden ist. Laufwerk Gerät zur Datenspeicherung wie CD-ROM, Festplatte oder Diskette. Unter Windows wird jedem Laufwerk zur leichteren Verwaltung ein Buchstabe zugeordnet.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk GLOSS.fm 7/27/07 Rev. C A5 Size RAM Abkürzung für Random Access Memory. Der Teil des Druckerspeichers, der als Eingangsspeicher genutzt wird sowie zum Speichern benutzerdefinierter Zeichen. Alle Daten, die im RAM gespeichert sind, gehen beim Ausschalten des Druckers verloren. ROM Abkürzung für Read Only Memory (Nur zu lesender Speicher).
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk GLOSS.fm 7/27/07 Rev. C A5 Size Spool Manager Programm, das Druckdaten in Befehlscodes umwandelt, die der Drucker versteht. Siehe auch Spoolen. sRGB Windows Software, mit der Sie eine WYSIWYG- (What You See Is What You Get) Farbausgabe erhalten. Diese Software druckt Farben so, wie Sie sie auf dem Bildschirm sehen. Status Monitor Softwareprogramm, mit dem Sie den Druckerstatus abfragen können.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas R41AA177P (A+) all.bk ALLIX.fm 7/27/07 Rev.
Proof Sign-off: AVA M.Arai K.Nishi K.Nishi LATEX H.Nicholas einlegen, 199 Medientyp, 331 Rollenpapier einlegen, 199 R41AA177P (A+) all.bk ALLIX.fm 7/27/07 Rev.