Operation Manual

Item Parameter Explanation
Cut Sheet
Remaining
Off
Choose whether or not to show (On/Off) Cut Sheet
Remaining in the Menu. When set to On, Cut Sheet
Remaining is displayed in the Menu, from which you can
set the number of pages to trigger a running low warning
and the number of pages loaded in the paper cassette.
On
Sleep Mode 5 minutes The printer enters sleep mode when there are no errors, no
print jobs being received, and no control panel or other
operations performed. This setting allows you to select
how many minutes to wait until automatically entering
sleep mode.
U “Turning Off the Power Using Power Management” on
page 49
15 minutes
60 minutes
120 minutes
180 minutes
Power
Management
Power Off Timer Disable The printer turns off automatically when there are no
errors, no print jobs being received, and no control panel
or other operations are performed for eight hours.
To change the amount of time required until the printer is
turned off completely, set the desired time in the Time To
Off setting. You can specify between 1 and 24 hours at
intervals of 1 hour for the Time To Off setting.
If you do not want the printer to automatically turn itself
off, set Power Off Timer to Disable.
Enable
Time To Off 1 to 24hour(s)
Default Panel Execute Restores all settings, such as configurable control panel
items and paper settings, to their factory settings.
Custom 0 to 255 Only modify these settings if instructed to do so by a
member of our support staff.
This is not normally used.
About Power Management
You can adjust the time before Power Management is applied.
Any increase will affect the printer's energy efficiency.
Please consider the environment before making any change.
Epson Stylus Pro 4900/4910 User's Guide
Appendix
161