Installation Instructions

To install and use the printer software (printer driver and
utilities) included on the CD-ROM or floppy disk packed with
your printer, the following is required:
Windows 3.1
Minimum system Recommended system
80386/25 MHz processor Pentium or higher processor
16MB RAM 32MB RAM or more
20MB hard disk space 50MB or more free hard disk space
VGA monitor VGA or better monitor
Windows 95 and NT 4.0
Minimum system Recommended system
80486/25 MHz processor Pentium or higher processor*
16MB RAM 32MB RAM or more
20MB hard disk space 50MB or more free hard disk space
VGA monitor VGA or better monitor
* For Windows NT, Intel or Intel x86 compatible processors only
Your computer dealer can help you update your system if it
does not meet these requirements.
When using your printer with a Macintosh
To use your printer, your Apple Macintosh must meet the
following system requirements and you need a standard Apple
System Peripheral-8 cable (8-pin mini-circular connector) or
equivalent.
L
Keywest Setup Guide
Rev.c
A5 size Chapter 1
10-09-97 DR, pass 0
1-6
Getting to Know Your Printer