Installation Instructions

Note for Windows NT 4.0 users:
If your printer does not print correctly as a remote printer, the
following procedure may help you solve the problem.
1. Install the Windows NT 4.0 printer software in your
computer as described on page 2-11.
2. Click
Start
, point to select
Settings
, and click
Printers
.
3. Right-click the icon of your printer, and click
Properties
.
4. Select a printer port other than
LPT1
in the Port menu.
5. From the DOS prompt, type
net use [
local port
] :\\ [
the
network path to your printer
]
, and then press the
Enter
key. For example
C:\net use lpt2:\\ epserver\SP-5000
.
6. Restart your computer.
Note:
If you need to cancel this setting, follow the instructions above and
type
:/d
instead of
[
the network path to your printer
]
in step 5. For
example,
C:\net use lpt2:/d
.
2
R
Keywest Setup Guide
Rev.c
A5 size Chapter 2
10-09-97 DR, pass 0
Getting Started
2-21