Installation Instructions

Note:
If you are using a Macintosh Quadra 950 or 900, you need to select
Compatible
in the Serial Switch dialog box before selecting your
printer from the Chooser. To open the Serial Switch dialog box, select
Control Panel
from the Apple menu, then select
Serial Switch
.
Using the serial interface
Follow the steps below to use the serial interface to send print
jobs directly to the printer.
1. Make sure the printer is connected to your Macintosh and is
turned on.
2. Choose
Chooser
from the Apple menu. Then click the
SPro 5000
icon and the port your printer is connected to.
Note:
❑
If you don’t see the
SPro 5000
icon, use the arrows on the
right to scroll through the available icons.
❑
If your Macintosh has only one serial port, select the modem
port.
CHO_SA
2
R
Keywest Setup Guide
Rev.c
A5 size Chapter 2
10-09-97 DR, pass 0
Getting Started
2-31