Installation Instructions

Using an AppleTalk network
Follow the steps below to use an AppleTalk network to send
print jobs to the printer.
1. Turn on your printer.
2. Select the
Chooser
from the Apple menu. Click the
SPro
5000(AT)
icon. Select the AppleTalk zone you want to use.
A list of all the printers connected to the selected zone
appears on the right.
Note:
If you don’t see the
SPro 5000(AT)
icon, use the arrows on the
right to scroll through the available icons.
3. Click the name you assigned to your EPSON Stylus Pro 5000.
4. Click
OK
if the printer model name is correct.
If your printer name does not appear, make sure the printer
is turned on and correctly connected, then click
RETRY
.
CHO_NB
2
R
Keywest Setup Guide
Rev.c
A5 size Chapter 2
10-09-97 DR, pass 0
Getting Started
2-33