Installation Instructions

Installing Memory
If you often print multiple copies of documents, EPSON
recommends you install extra printer memory. You can install
a maximum of 96 MB (32 MB
×
3) of Single Inline Memory
Modules (SIMMs) in your printer. By increasing memory, the
printer can release the host computer earlier, allowing you to
get back to your work quicker.
You can install the following type of SIMM:
Memory : 32 MB
Pin numbers : 72 pins
Access time : Less than 70 ns
Parity: No parity
Follow the steps below to install SIMM memory:
1. Turn off the printer. Unplug the power cord from the
electrical outlet (and from the back of the printer, if your
printers power cord is removable).
w
Warning:
Do not install SIMMs when the printer is connected to an
electrical outlet. If you do, you may damage the printer.
2. Turn the printer around so that its back faces you, and
disconnect any existing interface cable.
L
Keywest Setup Guide
Rev.c
A5 size Chapter 4
10-09-97 DR, pass 3
4-10
Installing Options and Memory Modules