Operation Manual

The Control Panel 179
9. Select AUTO and press the Menu r button. Then, press the
Paper Feed d button or Paper Feed u button to select
BI-D 2-COLOR.
10. Press the Enter button, and the printer starts printing. After
printing is complete, the head alignment starts automatically.
If you are not satisfied with the result of the BI-D 2-COLOR
alignment, press the Paper Source l button to return to the
previous level, and then select BI-D ALL.
If you are not satisfied with the result of the BI-D ALL
alignment, try UNI-D.
You can also align the print head individually by selecting
BI-D #1, BI-D #2, or BI-D #3. Select an ink dot size from
BI-D #1 to BI-D #3 depending on the media you use and the
print mode you want to try. The table in “Ink dot size” on
page 180 illustrates which parameter is available for the
media type and print quality. For Print Quality, refer to the
printer driver.
11. Press the Pause
button to return to the READY state.