Operation Manual

Problem Solver 300
For paper other than Epson’s, register and select paper
thickness in Menu mode. Make sure it is correct for the paper
you are using. See “Making the paper settings” on page 188.
❏ Set the PLATEN GAP to WIDE in the PRINTER SETTING of Menu
mode. See “PRINTER SETUP” on page 163.
Print quality could be better
Click the caption under the illustration that best resembles your
printout.
If you are having print quality problems, try the solutions offered
here.
“Horizontal banding” on page 301
“Vertical misalignment or
banding” on page 302
“Color documents print in black
only” on page 305
“Faint printout or gaps” on page
303
“Blurry or smeared printout” on
page 304