Installation Instructions

7
7. Remove the protective materials.
c
Caution:
Watch your fingers when opening and
closing the front cover.
8. Close the front cover.
Attaching the paper basket
1. Fully insert and attach the short basket hooks
(E) to the upper guides of base upright left and
right.
2. Likewise, fully insert and attach the long
basket hooks (D) to the lower guides.
3. Turning the stitch side downward, spread the
paper basket on the floor.
4. Holding the rear shaft, pass it under the
horizontal struts. Holding the rear shafts, turn
them one revolution as shown below. Then
insert the stanchion pins into the holes on the
base upright left and right.
5. Slide out the upper basket hooks to their full
length.
a: from the front cover (tapes)
b: from the ink compartment cover (tapes)
c: from the side of the print head compartment
(fixing metal plate inside the front cover)
a
b
c
E
D