Operation Manual

The Control Panel
12
Jamaica
Long.bk Rev. C
A5 size CONTP.FM
2/22/99 Pass 2
R
Proof Sign-off:
Miyazaki _______
Yamanouchi _______
Jacqueline _______
Buttons
Power Turns the printer on and off. Press this button while pressing
and holding the Pause button to enter the maintenance
mode. See “Maintenance Mode” on page 36.
Cleaning
3 Sec.
Print head cleaning is performed when pressed for three
seconds. Before cleaning, make sure that thick paper is
not loaded in the printer.
Pause
(Reset 3 Sec.)
Stops printing temporarily. Press a second time to resume
printing.
Clears print data in the printer memory if pressed and held
for three seconds.
When pressed in SelecType mode, the printer returns to
READY status.
SelecType Enters SelecType mode when pressed in READY status.
When pressed in SelecType mode, a desired menu can
be selected.
Paper Source
(Item)
Selects the paper source: Roll Auto Cut, Roll Cutter Off or
Sheet. If you press this button during the ink drying process,
press Enter to be able to make your setting.
When pressed in SelecType mode, a desired item can be
selected from the menu.
Paper Feed
u (+) Feeds paper in reverse. When pressed in SelecType mode,
a desired parameter can be selected from the selected
item. Parameters change in forward order.
Paper Feed
d (-) Feeds paper forward. When pressed in SelecType mode,
a desired parameter can be selected from the selected
item. Parameters change in reverse order.