Operation Manual

The Control Panel
17
Jamaica
Long.bk Rev. C
A5 size CONTP.FM
2/22/99 Pass 2
R
Proof Sign-off:
Miyazaki _______
Yamanouchi _______
Jacqueline _______
1. Enter the SelecType mode
Make sure that
READY
is displayed on the LCD panel, then
press the
SelecType
button.
The first menu,
PRINTER SETTING MENU
is displayed.
2. Select a menu
Press the
SelecType
button to select a desired menu.
For example:
PRINTER SETTING MENU
To return to the READY status, press the
Pause
button.
3. Select an item
Press the
Item
button. The first item of the selected menu is
displayed. Press the
Item
button to select a desired item.
For example:
PAGE LINE = ON*
(✽ shows that the displayed
parameter is the default value.)
If the item is for execution only, press the
Enter
button to
execute the function for the item. After execution, the printer
exits SelecType mode and returns to the READY status.
For example:
INIT. PANEL = EXEC
(Initializes the current
panel settings to the factory-set values.)
4. Select a parameter
Press the + or - button to select a parameter for the item.
For example:
PAGE LINE = OFF
. Note that the asterisk ✽
disappears. This means that the selected parameter (OFF) is
not yet stored as the default value.
To display the next item without changing the default value,
press the
Item
button.
5. Set the parameter
Press the
Enter
button to store the selected parameter as the
default value.
For example:
PAGE LINE = OFF*
is displayed.
Press the
Item
button to return to step 3 if you want to select
another item.