Operation Manual

The Control Panel
19
Jamaica
Long.bk Rev. C
A5 size CONTP.FM
2/22/99 Pass 2
R
Proof Sign-off:
Miyazaki _______
Yamanouchi _______
Jacqueline _______
Printer Setting menu (PRINTER SETTING MENU)
This menu allows you to make various settings which change the
operation of the printer.
PLATEN GAP (Platen gap adjustment)
Normally, leave this set to AUTO. If you find that the printed
image is smeared, select WIDE.
PAGE LINE
Select whether page lines are printed on the roll paper.
The Print Page Line operation changes according to the Auto Cut
settings as shown.
Note:
When the Sheet light is on, the Print Page Line setting is not available.
Roll Auto Cut light Print Page Line Printer’s Operation
On On Prints page line on the right
side only, and cuts paper
automatically after the print
job.
On Off Cuts paper automatically
after the print job.
Roll Cutter Off light Print Page Line Printer’s Operation
On On Prints page lines on the right
side and below the document.
On Off Does not print page lines nor
cut.