Operation Manual

The Control Panel
29
Jamaica
Long.bk Rev. C
A5 size CONTP.FM
2/22/99 Pass 2
R
Proof Sign-off:
Miyazaki _______
Yamanouchi _______
Jacqueline _______
3. Press the + or - button to select the number registered that you
want to use. Then press the
Enter
button.
4. Press the
Pause
button to exit the SelecType mode.
Printing a status sheet
In SelecType mode, a status sheet can be printed to see the current
SelecType default values.
1. Load paper as described in Chapter 4, “Using Roll Paper” or
Chapter 4, “Using Cut Sheet Media”.
2. In SelecType mode, press the
SelecType
button until
TEST
PRINT MENU
is displayed.
3. Press the
Item
button until
STATUS CHECK = PRINT
is
displayed.
4. Press the
Enter
button.
A status sheet is printed. After printing, the printer exits
SelecType mode and returns to the READY status.
Maintenance Mode
Using the maintenance mode you can perform a hex dump and
select the language to be displayed on the LCD.
How to enter the maintenance mode
While pressing and holding the
Pause
button, press the
Power
button to turn on the printer.
MAINTENANCE MODE
is displayed on the LCD while the printer
enters maintenance mode.