Operation Manual

Paper Handling

Jamaica

Long.bk Rev. C

A5 size PAPER.FM

2/22/99 Pass 2

Proof Sign-off:

Miyazaki _______

Yamanouchi _______

Jacqueline _______

Note:

If the Roll Auto Cut light is on, and the bottom edge of the roll

paper was not cut properly after the previous print job, press the

Cut/Eject

button to recut the edge.

9. Press the

Pause

button.

The print heads move and the paper feeds into the printing

position automatically. READY appears on the LCD panel.

Note:

Even if you do not press the

Pause

button, the print heads move

and paper feeds into the printing position automatically.

READY

appears on the LCD panel.

10. Make the printer driver settings (see “Accessing the Printer

Software” on page 33), then send a print job from the

computer. The printer starts printing.

Note:

Make sure that the Paper Source setting in the printer driver

matches the paper loaded in the printer.

11. After you finish printing, you may need to cut the roll paper.

See “Cutting roll paper or printing page lines” on page 92.