Operation Manual

Display
1. Messages
Displays the printer status, operation, and error
messages.
See “Error Messages on the LCD Panel” on page
87
See “Details of Menu mode” on page 20
2. Paper Source icon
Displays the paper source and roll paper cut setting.
You can select the following paper source icons by
pressing the
button displayed on the LCD panel.
When you print from the printer driver, the settings
you make on the printer driver have priority over the
settings you make on the printer’s control panel.
Icon Explanation
Prints on the roll paper. It cuts the roll
paper automatically after printing each
page.
When using the optional Auto Take-up
Reel Unit, set the Auto switch to Off;
otherwise, the printer does not cut the
paper.
Prints on the roll paper. It does not cut
automatically after printing.
Prints on the sheet.
3. Platen Gap icon/Paper Number
Normally, displays the Platen Gap setting.
See “PRINTER SETUP” on page 20
Icon Explanation
None STANDARD
NARROW
WIDE
WIDER
WIDEST
When you select paper number (1 to 10) for CUSTOM
PAPER, the number you selected appears.
See “PAPER SETUP” on page 24
4. Roll Paper Margin icon
Displays the paper margin icon with the margins
you have selected for the ROLL PAPER MARGIN.
❏ 15mm: When TOP/BOTTOM 15mm is selected.
❏ 35/15mm: When TOP 35/BOTTOM 15mm is
selected.
❏ 45/15mm: When TOP 45/BOTTOM 15mm is
selected.
❏ 3mm: When 3mm is selected.
❏ 15mm: When 15mm is selected.
❏ Auto: When DEFAULT is selected.
See “PRINTER SETUP” on page 20
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide
The Control Panel
13