Operation Manual

C
Select the registered number for the user setting.
You can select the number from 1 to 10.
1. Press the
/ button to select the
number you want to register.
2. Press the
button.
The settings you make from step 4 are
registered in the number you have selected here.
Note:
We recommend you write down the registered
number and the settings you make from step 4.
D
Select paper type, if necessary.
1. Press the
/ button to select PAPER
TYPE, and then press the
button.
2. Press the
/ button to select media
type, and then press the
button.
3. Press the
/ button to select media.
4. Press the
button.
5. Press the
button twice to go back to the
previous menu.
E
Set the distance between the print head and the
paper (Platen Gap), if necessary.
1. Press the
/ button to select PLATEN
GAP, and then press the
button.
2. Press the
/ button to select a suitable
setting for the paper.
3. Press the
button.
4. Press the
button to go back to the
previous menu.
Note:
You can adjust the distance between the print
head and paper. The print quality improves
when you adjust the Platen Gap properly. If the
Platen Gap is too narrow when you print on
the thick paper, the print head touches the
paper so that the print head and the paper may
be damaged.
Paper thickness Platen Gap
Thick paper Wider
Wide
Normal paper Standard
Thin paper Narrow
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide
Variety of Printings
151